Document OF graph on MMSYS/VDOSYS: this supports up to three DDP paths
per HW instance (so potentially up to six displays for multi-vdo SoCs).
The MMSYS or VDOSYS is always the first component in the DDP pipeline,
so it only supports an output port with multiple endpoints - where each
endpoint defines the starting point for one of the (currently three)
possible hardware paths.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
.../bindings/arm/mediatek/mediatek,mmsys.yaml | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
index b3c6888c1457..90758bb5bcb1 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -93,6 +93,29 @@ properties:
'#reset-cells':
const: 1
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port node. This port connects the MMSYS/VDOSYS output to
+ the first component of one display pipeline, for example one of
+ the available OVL or RDMA blocks.
+ Some MediaTek SoCs support up to three display outputs per MMSYS.
+ properties:
+ endpoint@0:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: Output to the primary display pipeline
+
+ endpoint@1:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: Output to the secondary display pipeline
+
+ endpoint@2:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: Output to the tertiary display pipeline
+
+ required:
+ - endpoint@0
+
required:
- compatible
- reg
--
2.44.0
