From: Fabio Estevam <festevam@xxxxxxx> Doument the port node to link the PTN5150 to a TypeC controller. This fixes the following dt-schema warnings: imx8mp-dhcom-pdk3.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml# Signed-off-by: Fabio Estevam <festevam@xxxxxxx> --- .../devicetree/bindings/extcon/extcon-ptn5150.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml index d5cfa32ea52d..3472c69056ac 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml @@ -36,6 +36,11 @@ properties: description: GPIO pin (output) used to control VBUS. If skipped, no such control takes place. + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + A port node to link the PTN5150 to a TypeC controller. + unevaluatedProperties: false required: - compatible @@ -58,5 +63,11 @@ examples: interrupt-parent = <&msmgpio>; interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>; + + port { + ptn5150_out_ep: endpoint { + remote-endpoint = <&dwc3_0_ep>; + }; + }; }; }; -- 2.34.1
