From: Fabio Estevam <festevam@xxxxxxx> The original .txt bindings had the OV2680 power supply names correct, but the transition from .txt to yaml spelled them incorrectly. Fix the OV2680 power supply names as the original .txt bindings as these are the names used by the OV2680 driver and in devicetree. Fixes: 57226cd8c8bf ("media: dt-bindings: ov2680: convert bindings to yaml") Signed-off-by: Fabio Estevam <festevam@xxxxxxx> --- Changes since v3: - Newly introduced. .../bindings/media/i2c/ovti,ov2680.yaml | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml index cf456f8d9ddc..c87677f5e2a2 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml @@ -37,15 +37,15 @@ properties: active low. maxItems: 1 - dovdd-supply: + DOVDD-supply: description: Definition of the regulator used as interface power supply. - avdd-supply: + AVDD-supply: description: Definition of the regulator used as analog power supply. - dvdd-supply: + DVDD-supply: description: Definition of the regulator used as digital power supply. @@ -59,9 +59,9 @@ required: - reg - clocks - clock-names - - dovdd-supply - - avdd-supply - - dvdd-supply + - DOVDD-supply + - AVDD-supply + - DVDD-supply - reset-gpios - port @@ -82,9 +82,9 @@ examples: clock-names = "xvclk"; reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - dovdd-supply = <&sw2_reg>; - dvdd-supply = <&sw2_reg>; - avdd-supply = <®_peri_3p15v>; + DOVDD-supply = <&sw2_reg>; + DVDD-supply = <&sw2_reg>; + AVDD-supply = <®_peri_3p15v>; port { ov2680_to_mipi: endpoint { -- 2.34.1