On Tue, Apr 02, 2024 at 01:45:03PM +0800, Richard Zhu wrote: > Add i.MX8QM and i.MX8QXP HSIO SerDes PHY binding. > - Use the controller ID to specify which controller is binded to the > PHY. > - Introduce one HSIO configuration, mandatory required to set > "PCIE_AB_SELECT" and "PHY_X1_EPCS_SEL" during the initialization. > > Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx> You missed all conor's comments. Please double check v1's comments. Frank > --- > .../bindings/phy/fsl,imx8q-hsio.yaml | 143 ++++++++++++++++++ > 1 file changed, 143 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8q-hsio.yaml > > diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8q-hsio.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8q-hsio.yaml > new file mode 100644 > index 000000000000..506551d4d94a > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/fsl,imx8q-hsio.yaml > @@ -0,0 +1,143 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/fsl,imx8q-hsio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX8Q SoC series HSIO SERDES PHY > + > +maintainers: > + - Richard Zhu <hongxing.zhu@xxxxxxx> > + > +properties: > + compatible: > + enum: > + - fsl,imx8qxp-serdes > + - fsl,imx8qm-serdes > + reg: > + minItems: 4 > + maxItems: 4 > + > + "#phy-cells": > + const: 3 > + description: | > + The first number defines the ID of the PHY contained in the HSIO macro. > + The second defines controller ID binded to the PHY. The third defines the > + HSIO configuratons refer to the different use cases. They are defined in > + dt-bindings/phy/phy-imx8-pcie.h > + > + reg-names: > + items: > + - const: reg > + - const: phy > + - const: ctrl > + - const: misc > + > + clocks: > + minItems: 5 > + maxItems: 14 > + > + clock-names: > + minItems: 5 > + maxItems: 14 > + > + fsl,refclk-pad-mode: > + description: | > + Specifies the mode of the refclk pad used. It can be UNUSED(PHY > + refclock is derived from SoC internal source), INPUT(PHY refclock > + is provided externally via the refclk pad) or OUTPUT(PHY refclock > + is derived from SoC internal source and provided on the refclk pad). > + Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants > + to be used. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [ 0, 1, 2 ] I remember needn't enum because there are header file. > + > + power-domains: > + description: | > + i.MX8Q HSIO SerDes power domains. i.MX8QXP has one SerDes power domains. > + And i.MX8QM has two. > + minItems: 1 > + maxItems: 2 > + > +required: > + - compatible > + - reg > + - "#phy-cells" > + - clocks > + - clock-names > + - fsl,refclk-pad-mode > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - fsl,imx8qxp-serdes > + then: > + properties: > + clock-names: > + items: > + - const: apb_pclk0 > + - const: pclk0 > + - const: phy0_crr > + - const: ctl0_crr > + - const: misc_crr > + power-domains: > + minItems: 1 > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - fsl,imx8qm-serdes > + then: > + properties: > + clock-names: > + items: > + - const: pclk0 > + - const: pclk1 > + - const: apb_pclk0 > + - const: apb_pclk1 > + - const: pclk2 > + - const: epcs_tx > + - const: epcs_rx > + - const: apb_pclk2 > + - const: phy0_crr > + - const: phy1_crr > + - const: ctl0_crr > + - const: ctl1_crr > + - const: ctl2_crr > + - const: misc_crr > + power-domains: > + minItems: 2 > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/imx8-clock.h> > + #include <dt-bindings/clock/imx8-lpcg.h> > + #include <dt-bindings/firmware/imx/rsrc.h> > + #include <dt-bindings/phy/phy-imx8-pcie.h> > + > + serdes: phy@5f1a0000 { No "serdes". > + compatible = "fsl,imx8qxp-serdes"; > + reg = <0x5f1a0000 0x10000>, > + <0x5f120000 0x10000>, > + <0x5f140000 0x10000>, > + <0x5f160000 0x10000>; > + reg-names = "reg", "phy", "ctrl", "misc"; > + clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>, > + <&phyx1_lpcg IMX_LPCG_CLK_4>, > + <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>, > + <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>, > + <&misc_crr5_lpcg IMX_LPCG_CLK_4>; > + clock-names = "apb_pclk0", "pclk0", "phy0_crr", "ctl0_crr", > + "misc_crr"; > + power-domains = <&pd IMX_SC_R_SERDES_1>; > + #phy-cells = <3>; > + status = "disabled"; needn't status = "disabled". > + }; > +... > -- > 2.37.1 >
