Add a setup function implementation to the spi module to enable spi-3wire
when specified in the device-tree. If spi-3wire is not specified in the
device-tree, NULL is returned as bus pre-initialization. This behavior
is identical to the i2c initialization, hence the default initialization.
Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx>
---
drivers/iio/accel/adxl345.h | 1 +
drivers/iio/accel/adxl345_spi.c | 10 +++++++++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h
index e859c01d4..3d5c8719d 100644
--- a/drivers/iio/accel/adxl345.h
+++ b/drivers/iio/accel/adxl345.h
@@ -31,6 +31,7 @@
#define ADXL345_DATA_FORMAT_RANGE GENMASK(1, 0) /* Set the g range */
#define ADXL345_DATA_FORMAT_JUSTIFY BIT(2) /* Left-justified (MSB) mode */
#define ADXL345_DATA_FORMAT_FULL_RES BIT(3) /* Up to 13-bits resolution */
+#define ADXL345_DATA_FORMAT_SPI_3WIRE BIT(6) /* 3-wire SPI mode */
#define ADXL345_DATA_FORMAT_SELF_TEST BIT(7) /* Enable a self test */
#define ADXL345_DATA_FORMAT_2G 0
diff --git a/drivers/iio/accel/adxl345_spi.c b/drivers/iio/accel/adxl345_spi.c
index 1c0513bd3..57e16b441 100644
--- a/drivers/iio/accel/adxl345_spi.c
+++ b/drivers/iio/accel/adxl345_spi.c
@@ -20,6 +20,11 @@ static const struct regmap_config adxl345_spi_regmap_config = {
.read_flag_mask = BIT(7) | BIT(6),
};
+static int adxl345_spi_setup(struct device *dev, struct regmap *regmap)
+{
+ return regmap_write(regmap, ADXL345_REG_DATA_FORMAT, ADXL345_DATA_FORMAT_SPI_3WIRE);
+}
+
static int adxl345_spi_probe(struct spi_device *spi)
{
struct regmap *regmap;
@@ -33,7 +38,10 @@ static int adxl345_spi_probe(struct spi_device *spi)
if (IS_ERR(regmap))
return dev_err_probe(&spi->dev, PTR_ERR(regmap), "Error initializing regmap\n");
- return adxl345_core_probe(&spi->dev, regmap, NULL);
+ if (spi->mode & SPI_3WIRE)
+ return adxl345_core_probe(&spi->dev, regmap, adxl345_spi_setup);
+ else
+ return adxl345_core_probe(&spi->dev, regmap, NULL);
}
static const struct adxl345_chip_info adxl345_spi_info = {
--
2.25.1
