Re: [PATCH] arm64: dts: rockchip: quartzpro64: Enable the GPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Heiko,

On 2024-03-27 11:29, Heiko Stübner wrote:
Am Montag, 25. März 2024, 17:19:04 CET schrieb Dragan Simic:
Following the approach used to enable the Mali GPU on the rk3588-evb1, [1] do the same for the Pine64 QuartzPro64, which uses nearly identical hardware
design as the RK3588 EVB1.

The slight disadvantage is that the regulator coupling logic requires the regulators to be always on, which is also noted in the comments. This is obviously something to be improved at some point in the future, but should be fine for now, especially because the QuartzPro64 isn't a battery-powered
board, so low power consumption isn't paramount.

[1] https://lore.kernel.org/linux-rockchip/20240325153850.189128-5-sebastian.reichel@xxxxxxxxxxxxx/

Signed-off-by: Dragan Simic <dsimic@xxxxxxxxxxx>

as lore.kernel.org and therefore b4 seems to be on vacation today, you
get a very personal "applied" message ;-) .

So, applied for 6.10 after the core rk3588-gpu-series from Sebastian.

Oh, thank you very much for this special message. :)




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux