Hi, Am Montag, 25. März 2024, 17:19:04 CET schrieb Dragan Simic: > Following the approach used to enable the Mali GPU on the rk3588-evb1, [1] > do the same for the Pine64 QuartzPro64, which uses nearly identical hardware > design as the RK3588 EVB1. > > The slight disadvantage is that the regulator coupling logic requires the > regulators to be always on, which is also noted in the comments. This is > obviously something to be improved at some point in the future, but should > be fine for now, especially because the QuartzPro64 isn't a battery-powered > board, so low power consumption isn't paramount. > > [1] https://lore.kernel.org/linux-rockchip/20240325153850.189128-5-sebastian.reichel@xxxxxxxxxxxxx/ > > Signed-off-by: Dragan Simic <dsimic@xxxxxxxxxxx> as lore.kernel.org and therefore b4 seems to be on vacation today, you get a very personal "applied" message ;-) . So, applied for 6.10 after the core rk3588-gpu-series from Sebastian. Heiko