On Tue, Mar 26, 2024 at 10:01:36AM +0000, Kieran Bingham wrote: > Quoting Laurent Pinchart (2024-03-25 22:50:48) > > From: Jacopo Mondi <jacopo@xxxxxxxxxx> > > > > The I2C2 bus is used for the CSI and DSI connectors only, no devices are > > connected to it on neither the Debix Model A nor its IO board. Remove > > the bus from the board's .dts and rely on display panel or camera sensor > > overlsy to enable it when necessary. > > s/overlsy/overlays/ Oops. Shawn, could you fix this when taking the patch in your tree, or would you live me to submit a v2 ? > Reviewed-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx> > > > > > Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx> > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > --- > > .../boot/dts/freescale/imx8mp-debix-model-a.dts | 14 -------------- > > 1 file changed, 14 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > > index 5ac77eaf23d5..26c303b7c7fa 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > > @@ -210,13 +210,6 @@ ldo5: LDO5 { > > }; > > }; > > > > -&i2c2 { > > - clock-frequency = <100000>; > > - pinctrl-names = "default"; > > - pinctrl-0 = <&pinctrl_i2c2>; > > - status = "okay"; > > -}; > > - > > &i2c3 { > > clock-frequency = <400000>; > > pinctrl-names = "default"; > > @@ -392,13 +385,6 @@ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 > > >; > > }; > > > > - pinctrl_i2c2: i2c2grp { > > - fsl,pins = < > > - MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 > > - MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 > > - >; > > - }; > > - > > pinctrl_i2c3: i2c3grp { > > fsl,pins = < > > MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 -- Regards, Laurent Pinchart