Hi all, we had some problems with failing ADC calibration on the i.MX93 boards. Changing default calibration settings fixed this. The board where this patches are useful is not yet upstream but will be soon (hopefully). Since we had these patches laying around we thought they might also be useful for someone else. Best regards, Andrej Andrej Picej (2): iio: adc: imx93: Make calibration properties configurable dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties .../bindings/iio/adc/nxp,imx93-adc.yaml | 15 +++++ drivers/iio/adc/imx93_adc.c | 66 +++++++++++++++++-- 2 files changed, 76 insertions(+), 5 deletions(-) -- 2.25.1