Hello Himanshu,
On 2024-03-15 09:40, Himanshu Bhavani wrote:
Add '&gmac2phy' node to enable ethernet1 on rk3328-rock64
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@xxxxxxxxxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 229fe9da9c2d..cb919367db54 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -12,6 +12,7 @@ / {
aliases {
ethernet0 = &gmac2io;
+ ethernet1 = &gmac2phy;
mmc0 = &sdmmc;
mmc1 = &emmc;
};
@@ -392,3 +393,7 @@ &vop {
&vop_mmu {
status = "okay";
};
+
+&gmac2phy {
+ staus = "okay";
+};
Unfortunately, this isn't an acceptable change to the Rock64 dts file.
Yes, there's the second built-in Ethernet interface in the RK3328 SoC,
but the Rock64 layout doesn't expose it as a separate physical network
interface, i.e. it isn't available as a port.
Such a change would be fine to be applied to the dts by hand, by someone
who actually adds a second physical network port to their Rock64.
