Re: [PATCH v2 3/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 14 Mar 2024 at 14:48, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
>
>
> On 3/14/24 10:04, Sumit Garg wrote:
> > Hi Konrad,
> >
> > On Wed, 13 Mar 2024 at 18:34, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
> >>
> >>
> >>
> >> On 3/13/24 13:30, Sumit Garg wrote:
> >>> Add Schneider Electric HMIBSC board DTS. The HMIBSC board is an IIoT Edge
> >>> Box Core board based on the Qualcomm APQ8016E SoC.
> >>>
> >>> Support for Schneider Electric HMIBSC. Features:
> >>> - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306)
> >>> - 1GiB RAM
> >>> - 8GiB eMMC, SD slot
> >>> - WiFi and Bluetooth
> >>> - 2x Host, 1x Device USB port
> >>> - HDMI
> >>> - Discrete TPM2 chip over SPI
> >>> - USB ethernet adaptors (soldered)
> >>>
> >>> Co-developed-by: Jagdish Gediya <jagdish.gediya@xxxxxxxxxx>
> >>> Signed-off-by: Jagdish Gediya <jagdish.gediya@xxxxxxxxxx>
> >>> Signed-off-by: Sumit Garg <sumit.garg@xxxxxxxxxx>
> >>> ---
> >>
> >> [...]
> >>
> >>> +     memory@80000000 {
> >>> +             reg = <0 0x80000000 0 0x40000000>;
> >>> +     };
> >>
> >> I'm not sure the entirety of DRAM is accessible..
> >>
> >> This override should be unnecessary, as bootloaders generally update
> >> the size field anyway.
> >
> > On this board, U-Boot is used as the first stage bootloader (replacing
> > Little Kernel (LK), thanks to Stephan's work). And U-Boot consumes
> > memory range from DT as Linux does but doesn't require any memory to
> > be reserved for U-Boot itself. So apart from reserved memory nodes
> > explicitly described in DT all the other DRAM regions are accessible.
>
> Still, u-boot has code to fetch the size dynamically, no?
>

No U-Boot being the first stage bootloader fetches size from DT which
is bundled into U-Boot binary.

> [...]
>
> >>
> >>> +
> >>> +             compatible = "adi,adv7533";
> >>> +             reg = <0x39>;
> >>> +
> >>> +             interrupt-parent = <&tlmm>;
> >>> +             interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
> >>
> >> interrupts-extended
> >>
> >
> > Please see Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml.
>
> Okay, and what am I supposed to see there?

I meant you to refer to an example there but looks like
interrupts-extended is a valid replacement too. I will use that
instead.

-Sumit

>
> Konrad




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux