Re: [PATCH v5 2/2] nvmem: add new NXP QorIQ eFuse driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/10/23 04:20, Richard Alpe wrote:
> Add SFP (Security Fuse Processor) read support for NXP (Freescale)
> QorIQ series SOC's.
>
> This patch adds support for the T1023 SOC using the SFP offset from
> the existing T1023 device tree. In theory this should also work for
> T1024, T1014 and T1013 which uses the same SFP base offset.
>
> Signed-off-by: Richard Alpe <richard@xxxxxxxx>

This seems like a duplicate of layerscape-sfp.c. The hardware is
(presumably) quite similar, with the T1024RM referencing the QorIQ Trust
Architecture User Guide version 2.0, and the L1046 (e.g.) referencing
version 2.1.

I think this driver should be removed in favor of the older driver.
There are some problematic bits: most notably no offset is applied by
this driver, so all fuses have an offset of 0x200. So we will need to
implement/document this only for the "fsl,t1023-sfp" compatible, which
has already made its way into the T1023 devicetree...

This really should have been caught during review; a quick grep for
"SFP" would have revealed the duplication.

--Sean

[Embedded World 2024, SECO SpA]<https://www.messe-ticket.de/Nuernberg/embeddedworld2024/Register/ew24517689>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux