Re: [PATCH 3/3] dt-bindings: hwmon: max31790: Add pwmout-pin-as-tach-input property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/03/2024 12:13, Chanh Nguyen wrote:
> Add pwmout-pin-as-tach-input property.

Why is this split from original binding? This does not make much
sense... Add complete hardware description.

> 
> Signed-off-by: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/hwmon/max31790.yaml | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/max31790.yaml b/Documentation/devicetree/bindings/hwmon/max31790.yaml
> index 5a93e6bdebda..447cac17053a 100644
> --- a/Documentation/devicetree/bindings/hwmon/max31790.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/max31790.yaml
> @@ -25,6 +25,16 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  pwmout-pin-as-tach-input:
> +    description: |
> +      An array of six integers responds to six PWM channels for
> +      configuring the pwm to tach mode.
> +      When set to 0, the associated PWMOUT produces a PWM waveform for
> +      control of fan speed. When set to 1, PWMOUT becomes a TACH input

No vendor prefix, so generic property... but where is it defined?


Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux