Enable both USB controllers and associated hsphy and qmp phy nodes
on QRU1000 IDP.
Co-developed-by: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
Signed-off-by: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qru1000-idp.dts | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
index 258483af065b..c4d8027b8b20 100644
--- a/arch/arm64/boot/dts/qcom/qru1000-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
@@ -467,3 +467,27 @@ &tlmm {
&uart7 {
status = "okay";
};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l8a_0p91>;
+ vdda18-supply = <&vreg_l14a_1p8>;
+ vdda33-supply = <&vreg_l2a_2p3>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l8a_0p91>;
+ vdda-pll-supply = <&vreg_l3a_1p2>;
+
+ status = "okay";
+};
--
2.42.0
