Re: [PATCH v2 1/3] mips: dts: ralink: mt7621: associate uart1_pins with serial0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Angelo

On 2024-03-08 10:41, AngeloGioacchino Del Regno wrote:
Il 07/03/24 20:04, Justin Swartz ha scritto:
Add missing pinctrl-name and pinctrl-0 properties to declare
that the uart1_pins group is associated with serial0.

Signed-off-by: Justin Swartz <justin.swartz@xxxxxxxxxxxxxxxx>
---
  arch/mips/boot/dts/ralink/mt7621.dtsi | 3 +++
  1 file changed, 3 insertions(+)

diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 35a10258f..dca415fdd 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -123,6 +123,9 @@ serial0: serial@c00 {
  			reg-shift = <2>;
  			reg-io-width = <4>;
  			no-loopback-test;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
  		};
    		spi0: spi@b00 {

The pins are muxed and can be either UART, or some other function that
is supported by the mux: this means that the pinctrl-xxx properties shall
*not* go into the SoC dtsi file, but in board dts files instead.

Said differently: the usage of the UART pins is board-specific, not SoC-wide.

Thanks for the explanation. I agree that the pinctrl properties
would make more sense in a serial node extension in a board's dts,
but my reason for including them in the SoC's dtsi is due to the
precedent set with these existing nodes:

  i2c
  spi0
  mmc
  ethernet
  pcie

There is also a default function declared for each of the pin
groups defined under the pinctrl node. These functions co-incide
with what is intended for each of those device nodes to function
correctly, rather than in the alternative GPIO-mode.

So I thought that sticking with that existing pattern would get
the least resistance from the community.

I can imagine how moving the pinctrl node to the board dts, and
then moving all of the pinctrl properties associated with device
nodes to their board dts references could be a better separation
logically.

What do you recommend?

Regards
Justin




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux