Re: [PATCH v4 29/39] irqchip/atmel-aic5: Add support to get nirqs from DT for sam9x60 & sam9x7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/03/24 5:51 pm, claudiu beznea wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 23.02.2024 19:29, Varshini Rajendran wrote:
>> Add support to get number of IRQs from the respective DT node for sam9x60
>> and sam9x7 devices. Since only this factor differs between the two SoCs,
>> this patch adds support for the same. Adapt the sam9x60 dtsi
>> accordingly.
>>
>> Signed-off-by: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
>> ---
>> Changes in v4:
>> - Changed the implementation to fetch the NIRQs from DT as per the
>>    comment to avoid introducing a new compatible when this is the only
>>    difference between the SoCs related to this IP.
>> ---
>>   arch/arm/boot/dts/microchip/sam9x60.dtsi |  1 +
>>   drivers/irqchip/irq-atmel-aic5.c         | 11 ++++++++---
>>   2 files changed, 9 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
>> index 73d570a17269..e405f68c9f54 100644
>> --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
>> +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
>> @@ -1201,6 +1201,7 @@ aic: interrupt-controller@fffff100 {
>>                                interrupt-controller;
>>                                reg = <0xfffff100 0x100>;
>>                                atmel,external-irqs = <31>;
>> +                             microchip,nr-irqs = <50>;
>>                        };
>>
>>                        dbgu: serial@fffff200 {
>> diff --git a/drivers/irqchip/irq-atmel-aic5.c b/drivers/irqchip/irq-atmel-aic5.c
>> index 145535bd7560..5d96ad8860d3 100644
>> --- a/drivers/irqchip/irq-atmel-aic5.c
>> +++ b/drivers/irqchip/irq-atmel-aic5.c
>> @@ -398,11 +398,16 @@ static int __init sama5d4_aic5_of_init(struct device_node *node,
>>   }
>>   IRQCHIP_DECLARE(sama5d4_aic5, "atmel,sama5d4-aic", sama5d4_aic5_of_init);
>>
>> -#define NR_SAM9X60_IRQS              50
>> -
>>   static int __init sam9x60_aic5_of_init(struct device_node *node,
>>                                       struct device_node *parent)
>>   {
>> -     return aic5_of_init(node, parent, NR_SAM9X60_IRQS);
>> +     int ret, nr_irqs;
>> +
>> +     ret = of_property_read_u32(node, "microchip,nr-irqs", &nr_irqs);
>> +     if (ret) {
>> +             pr_err("Not found microchip,nr-irqs property\n");
> 
> This breaks the ABI. You should ensure old device trees are still working
> with this patch.

The only older device that uses this API is sam9x60 and the newly added 
sam9x7. This change has been tested to be working fine in both the 
devices. If you still want me to use the macros as a fallback in the 
failure case I can do it. But this change was proposed to avoid adding 
macros in the first place. I can remove the error check just like they 
do while getting other device tree properties. Or if this is just a 
concern of the old devices working with the new change, then sam9x60 
works. Please let me know how to proceed.
> 
>> +             return ret;
>> +     }
>> +     return aic5_of_init(node, parent, nr_irqs);
>>   }
>>   IRQCHIP_DECLARE(sam9x60_aic5, "microchip,sam9x60-aic", sam9x60_aic5_of_init);

-- 
Thanks and Regards,
Varshini Rajendran.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux