Hi Chanwoo,
On 02/02/15 15:24, Chanwoo Choi wrote:
> This patch adds the the mux/divider/gate clocks for CMU_DISP domain which
> includes the clocks of Display IPs (DECON/HDMI/DSIM/MIXER). The CMU_DISP clocks
> is used to need the source clock of CMU_MIF domain so, the CMU_MIF's clocks
> related to CMU_DISP should be always on state.
Are you sure we need to add anything to CMU_MIF in this patch ?
> Also, CMU_DISP must need the source clock of 'sclk_hdmi_spdif_disp'
> from CMU_TOP domain. This patch adds the clocks of CMU_TOP related to HDMI.
>
> Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> Cc: Tomasz Figa <tomasz.figa@xxxxxxxxx>
> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx>
> ---
> drivers/clk/samsung/clk-exynos5433.c | 437 +++++++++++++++++++++++++++++++++
> include/dt-bindings/clock/exynos5433.h | 114 ++++++++-
> 2 files changed, 550 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
> index 3d6164e..cf3f0ac 100644
> --- a/drivers/clk/samsung/clk-exynos5433.c
> +++ b/drivers/clk/samsung/clk-exynos5433.c
> @@ -245,6 +245,8 @@ PNAME(mout_sclk_audio1_p) = { "ioclk_audiocdclk1", "oscclk",
> PNAME(mout_sclk_audio0_p) = { "ioclk_audiocdclk0", "oscclk",
> "mout_aud_pll_user_t",};
>
> +PNAME(mout_sclk_hdmi_spdif_p) = { "sclk_audio1", "ioclk_spdif_extclk", };
> +
> static struct samsung_fixed_factor_clock top_fixed_factor_clks[] __initdata = {
> FFACTOR(0, "oscclk_efuse_common", "oscclk", 1, 1, 0),
> };
> @@ -395,6 +397,10 @@ static struct samsung_mux_clock top_mux_clks[] __initdata = {
> MUX_SEL_TOP_PERIC1, 4, 2),
> MUX(CLK_MOUT_SCLK_AUDIO0, "mout_sclk_audio0", mout_sclk_audio0_p,
> MUX_SEL_TOP_PERIC1, 0, 2),
> +
> + /* MUX_SEL_TOP_DISP */
> + MUX(CLK_MOUT_SCLK_HDMI_SPDIF, "mout_sclk_hdmi_spdif",
> + mout_sclk_hdmi_spdif_p, MUX_SEL_TOP_DISP, 0, 1),
> };
>
> static struct samsung_div_clock top_div_clks[] __initdata = {
> @@ -1360,6 +1366,11 @@ static struct samsung_gate_clock mif_gate_clks[] __initdata = {
> ENABLE_SCLK_MIF, 1, CLK_IGNORE_UNUSED, 0),
> GATE(CLK_SCLK_BUS_PLL_ATLAS, "sclk_bus_pll_atlas", "sclk_bus_pll",
> ENABLE_SCLK_MIF, 0, CLK_IGNORE_UNUSED, 0),
> +
> + /* ENABLE_SCLK_TOP_DISP */
> + GATE(CLK_SCLK_HDMI_SPDIF_DISP, "sclk_hdmi_spdif_disp",
> + "mout_sclk_hdmi_spdif", ENABLE_SCLK_TOP_DISP, 0,
> + CLK_IGNORE_UNUSED, 0),
I think this clock should be added to top_gate_clks[] table instead, i.e.
it seems to belong to CMU_TOP, not CMU_MIF. Can you double check it ?
If you confirm this I will add following change when applying, no need
to resend again:
----8<-------
diff --git a/drivers/clk/samsung/clk-exynos5433.c
b/drivers/clk/samsung/clk-exynos5433.c
index cf3f0ac..edf9795 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -556,6 +556,11 @@ static struct samsung_gate_clock top_gate_clks[]
__initdata = {
MUX_ENABLE_TOP_PERIC1, 4, 0, 0),
GATE(CLK_SCLK_AUDIO0, "sclk_audio0", "div_sclk_audio0",
MUX_ENABLE_TOP_PERIC1, 0, 0, 0),
+
+ /* ENABLE_SCLK_TOP_DISP */
+ GATE(CLK_SCLK_HDMI_SPDIF_DISP, "sclk_hdmi_spdif_disp",
+ "mout_sclk_hdmi_spdif", ENABLE_SCLK_TOP_DISP, 0,
+ CLK_IGNORE_UNUSED, 0),
};
/*
@@ -1366,11 +1371,6 @@ static struct samsung_gate_clock mif_gate_clks[]
__initdata = {
ENABLE_SCLK_MIF, 1, CLK_IGNORE_UNUSED, 0),
GATE(CLK_SCLK_BUS_PLL_ATLAS, "sclk_bus_pll_atlas", "sclk_bus_pll",
ENABLE_SCLK_MIF, 0, CLK_IGNORE_UNUSED, 0),
-
- /* ENABLE_SCLK_TOP_DISP */
- GATE(CLK_SCLK_HDMI_SPDIF_DISP, "sclk_hdmi_spdif_disp",
- "mout_sclk_hdmi_spdif", ENABLE_SCLK_TOP_DISP, 0,
- CLK_IGNORE_UNUSED, 0),
};
----8<-------
--
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
