[PATCH v6 2/3] dt-bindings: pci: layerscape-pci: Add snps,dw-pcie.yaml reference

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add snps,dw-pcie.yaml reference. Clean up all context that already exist in
snps,dw-pcie.yaml. Update interrupt-names requirement for difference
compatible string.

Set 'unevaluatedProperties' back to 'false'.

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
 .../bindings/pci/fsl,layerscape-pcie.yaml     | 104 +++++++++++++-----
 1 file changed, 78 insertions(+), 26 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
index 3f2d058701d22..137cc17933a4b 100644
--- a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
@@ -11,7 +11,6 @@ maintainers:
 
 description:
   This PCIe RC controller is based on the Synopsys DesignWare PCIe IP
-  and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
   This controller derives its clocks from the Reset Configuration Word (RCW)
   which is used to describe the PLL settings at the time of chip-reset.
@@ -36,31 +35,18 @@ properties:
       - fsl,lx2160a-pcie
 
   reg:
-    description: base addresses and lengths of the PCIe controller register blocks.
+    maxItems: 2
+
+  reg-names:
+    maxItems: 2
 
   interrupts:
-    description: A list of interrupt outputs of the controller. Must contain an
-      entry for each entry in the interrupt-names property.
+    minItems: 1
+    maxItems: 3
 
   interrupt-names:
     minItems: 1
     maxItems: 3
-    description: It could include the following entries.
-    items:
-      oneOf:
-        - description:
-            Used for interrupt line which reports AER events when
-            non MSI/MSI-X/INTx mode is used.
-          const: aer
-        - description:
-            Used for interrupt line which reports PME events when
-            non MSI/MSI-X/INTx mode is used.
-          const: pme
-        - description:
-            Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
-            which has a single interrupt line for miscellaneous controller
-            events(could include AER and PME events).
-          const: intr
 
   fsl,pcie-scfg:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -69,23 +55,88 @@ properties:
       The second entry is the physical PCIe controller index starting from '0'.
       This is used to get SCFG PEXN registers
 
-  dma-coherent:
-    description: Indicates that the hardware IP block can ensure the coherency
-      of the data transferred from/to the IP block. This can avoid the software
-      cache flush/invalid actions, and improve the performance significantly
+  dma-coherent: true
+
+  msi-parent: true
+
+  iommu-map: true
 
   big-endian:
     $ref: /schemas/types.yaml#/definitions/flag
     description: If the PEX_LUT and PF register block is in big-endian, specify
       this property.
 
-unevaluatedProperties: true
+unevaluatedProperties: false
 
 required:
   - compatible
   - reg
   - interrupt-names
 
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,lx2160a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+        interrupt-names:
+          items:
+            - const: pme
+            - const: aer
+            - const: intr
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1028a-pcie
+            - fsl,ls1046a-pcie
+            - fsl,ls1043a-pcie
+            - fsl,ls1012a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: pme
+            - const: aer
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls2080a-pcie
+            - fsl,ls2085a-pcie
+            - fsl,ls2088a-pcie
+            - fsl,ls1021a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: intr
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1088a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: aer
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -98,7 +149,7 @@ examples:
         compatible = "fsl,ls1088a-pcie";
         reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
             <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
-        reg-names = "regs", "config";
+        reg-names = "dbi", "config";
         interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
         interrupt-names = "aer";
         #address-cells = <3>;
@@ -116,6 +167,7 @@ examples:
                         <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
                         <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
         iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+        msi-map = <0 &its 0 1>; /* Fixed-up by bootloader */
       };
     };
 ...
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux