From: Rafał Miłecki <rafal@xxxxxxxxxx> 1. Fixup infracfg clock controller binding It also acts as reset controller so #reset-cells is required. 2. Use -pins suffix for pinctrl This fixes: arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: syscon@10001000: '#reset-cells' is a required property from schema $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml# arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: pinctrl@1000b000: 'eth_default', 'eth_sleep', 'usb0_iddig', 'usb1_iddig' do not match any of the regexes: 'pinctrl-[0-9]+', 'pins$' from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml# Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx> --- arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 8 ++++---- arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 3 ++- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index 0c38f7b51763..234e3b23d7a8 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -129,7 +129,7 @@ ethernet_phy0: ethernet-phy@5 { }; &pio { - eth_default: eth_default { + eth_default: eth-default-pins { tx_pins { pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>, <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>, @@ -156,7 +156,7 @@ mdio_pins { }; }; - eth_sleep: eth_sleep { + eth_sleep: eth-sleep-pins { tx_pins { pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>, <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>, @@ -182,14 +182,14 @@ mdio_pins { }; }; - usb0_id_pins_float: usb0_iddig { + usb0_id_pins_float: usb0-iddig-pins { pins_iddig { pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>; bias-pull-up; }; }; - usb1_id_pins_float: usb1_iddig { + usb1_id_pins_float: usb1-iddig-pins { pins_iddig { pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>; bias-pull-up; diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 6d218caa198c..082672efba0a 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -249,10 +249,11 @@ topckgen: syscon@10000000 { #clock-cells = <1>; }; - infracfg: syscon@10001000 { + infracfg: clock-controller@10001000 { compatible = "mediatek,mt2712-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; pericfg: syscon@10003000 { -- 2.35.3