[PATCH v2 08/11] i2c: nomadik: fetch i2c-transfer-timeout-us property from devicetree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Allow overriding the default timeout value (200ms) from devicetree,
using the generic i2c-transfer-timeout-us property.

The i2c_adapter->timeout field is an unaccurate jiffies amount;
i2c-nomadik uses hrtimers for timeouts below one jiffy.

Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-nomadik.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index afd54999bbbb..2d3247979e45 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -964,6 +964,8 @@ static const struct i2c_algorithm nmk_i2c_algo = {
 static void nmk_i2c_of_probe(struct device_node *np,
 			     struct nmk_i2c_dev *priv)
 {
+	u32 timeout_usecs;
+
 	/* Default to 100 kHz if no frequency is given in the node */
 	if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq))
 		priv->clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
@@ -975,7 +977,12 @@ static void nmk_i2c_of_probe(struct device_node *np,
 		priv->sm = I2C_FREQ_MODE_FAST;
 	priv->tft = 1; /* Tx FIFO threshold */
 	priv->rft = 8; /* Rx FIFO threshold */
-	priv->timeout_usecs = 200 * USEC_PER_MSEC; /* Slave response timeout */
+
+	/* Slave response timeout */
+	if (!of_property_read_u32(np, "i2c-transfer-timeout-us", &timeout_usecs))
+		priv->timeout_usecs = timeout_usecs;
+	else
+		priv->timeout_usecs = 200 * USEC_PER_MSEC;
 }
 
 static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)

-- 
2.44.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux