Re: [PATCH v2 12/14] regulator: tps6594-regulator: Add TI TPS65224 PMIC regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri Feb 23, 2024 at 10:36 AM CET, Bhargav Raviprakash wrote:
> From: Nirmala Devi Mal Nadar <m.nirmaladevi@xxxxxxxx>

> @@ -122,6 +131,27 @@ static const struct linear_range ldos_4_ranges[] = {
>  	REGULATOR_LINEAR_RANGE(1200000, 0x20, 0x74, 25000),
>  };
>  
> +/* Voltage range for TPS65224 Bucks and LDOs */
> +static const struct linear_range tps65224_bucks_1_ranges[] = {

You prefixed your arrays with `tps65224` and that makes sense. However
you should also prefix the old ones with `tps6594` then.
This applies to the whole driver.

> @@ -374,11 +518,17 @@ static int tps6594_request_reg_irqs(struct platform_device *pdev,
>  {
>  	struct tps6594_regulator_irq_type *irq_type;
>  	struct tps6594 *tps = dev_get_drvdata(pdev->dev.parent);
> -	int j;
> +	size_t j;
>  	int irq;
>  	int error;
> +	size_t interrupt_cnt;
>  
> -	for (j = 0; j < REGS_INT_NB; j++) {
> +	/* Number of interrupts supported by each voltage source */
> +	interrupt_cnt = (tps->chip_id == TPS6594) ?
> +			 ARRAY_SIZE(tps6594_buck1_irq_types) :
> +			 ARRAY_SIZE(tps65224_buck1_irq_types);

The comment is not adding anything, the name is clear and ARRAY_SIZE is
quite explicit.

> +		for (i = 0; i < LDO_NB; i++) {
> +			if (ldo_configured[i] == 1)
> +				continue;
>  
> -			error = tps6594_request_reg_irqs(pdev, rdev, irq_data,
> -							 tps6594_ldos_irq_types[i],
> -							 &irq_idx);
> -			if (error)
> -				return error;
> +		struct tps6594_regulator_irq_type **ldos_irq_types = (tps->chip_id == TPS65224) ?
> +								       tps65224_ldos_irq_types :
> +								       tps6594_ldos_irq_types;
> +
> +		const struct regulator_desc *ldo_regs = (tps->chip_id == TPS65224) ?
> +							 tps65224_ldo_regs :
> +							 tps6594_ldo_regs;
> +
> +		rdev = devm_regulator_register(&pdev->dev, &ldo_regs[i], &config);
> +		if (IS_ERR(rdev))
> +			return dev_err_probe(tps->dev, PTR_ERR(rdev),
> +					     "failed to register %s regulator\n", pdev->name);
> +
> +		error = tps6594_request_reg_irqs(pdev, rdev, irq_data, ldos_irq_types[i], &irq_idx);
> +		if (error)
> +			return error;

There is an indentation missing on the content of the `for` loop.

Best regards,

-- 
Esteban "Skallwar" Blanc
BayLibre





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux