Re: [PATCH v11 1/4] remoteproc: zynqmp: fix lockstep mode memory region

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 28 Feb 2024 at 12:24, Tanmay Shah <tanmay.shah@xxxxxxx> wrote:
>
>
> On 2/28/24 11:08 AM, Mathieu Poirier wrote:
> > On Mon, Feb 19, 2024 at 09:44:34AM -0800, Tanmay Shah wrote:
> > > In lockstep mode, r5 core0 uses TCM of R5 core1. Following is lockstep
> > > mode memory region as per hardware reference manual.
> > >
> > >     |      *TCM*         |   *R5 View* | *Linux view* |
> > >     | R5_0 ATCM (128 KB) | 0x0000_0000 | 0xFFE0_0000  |
> > >     | R5_0 BTCM (128 KB) | 0x0002_0000 | 0xFFE2_0000  |
> > >
> > > However, driver shouldn't model it as above because R5 core0 TCM and core1
> > > TCM has different power-domains mapped to it.
> > > Hence, TCM address space in lockstep mode should be modeled as 64KB
> > > regions only where each region has its own power-domain as following:
> > >
> > >     |      *TCM*         |   *R5 View* | *Linux view* |
> > >     | R5_0 ATCM0 (64 KB) | 0x0000_0000 | 0xFFE0_0000  |
> > >     | R5_0 BTCM0 (64 KB) | 0x0002_0000 | 0xFFE2_0000  |
> > >     | R5_0 ATCM1 (64 KB) | 0x0001_0000 | 0xFFE1_0000  |
> > >     | R5_0 BTCM1 (64 KB) | 0x0003_0000 | 0xFFE3_0000  |
> > >
> > > This makes driver maintanance easy and makes design robust for future
> > > platorms as well.
> > >
> > > Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx>
> >
> > Now that I have a clearer picture of where things are going, I am adding this
> > patch to rproc-next.
> >
> > I'll wait for the DT crew for the rest of this set.
>
> Hi Mathieu,
>
> Is it okay if we wait for DT crew to clear new bindings as well before taking this one to rproc-next ?
>
> Just in case any modifications needed further?
>

Sure, we can do that too.

>
> Tanmay
>
>
> >
> > Thanks,
> > Mathieu
> >
> > > ---
> > >  drivers/remoteproc/xlnx_r5_remoteproc.c | 145 ++----------------------
> > >  1 file changed, 12 insertions(+), 133 deletions(-)
> > >
> > > diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
> > > index 4395edea9a64..42b0384d34f2 100644
> > > --- a/drivers/remoteproc/xlnx_r5_remoteproc.c
> > > +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
> > > @@ -84,12 +84,12 @@ static const struct mem_bank_data zynqmp_tcm_banks_split[] = {
> > >     {0xffeb0000UL, 0x20000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
> > >  };
> > >
> > > -/* In lockstep mode cluster combines each 64KB TCM and makes 128KB TCM */
> > > +/* In lockstep mode cluster uses each 64KB TCM from second core as well */
> > >  static const struct mem_bank_data zynqmp_tcm_banks_lockstep[] = {
> > > -   {0xffe00000UL, 0x0, 0x20000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 128KB each */
> > > -   {0xffe20000UL, 0x20000, 0x20000UL, PD_R5_0_BTCM, "btcm0"},
> > > -   {0, 0, 0, PD_R5_1_ATCM, ""},
> > > -   {0, 0, 0, PD_R5_1_BTCM, ""},
> > > +   {0xffe00000UL, 0x0, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
> > > +   {0xffe20000UL, 0x20000, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
> > > +   {0xffe10000UL, 0x10000, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
> > > +   {0xffe30000UL, 0x30000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
> > >  };
> > >
> > >  /**
> > > @@ -540,14 +540,14 @@ static int tcm_mem_map(struct rproc *rproc,
> > >  }
> > >
> > >  /*
> > > - * add_tcm_carveout_split_mode()
> > > + * add_tcm_banks()
> > >   * @rproc: single R5 core's corresponding rproc instance
> > >   *
> > > - * allocate and add remoteproc carveout for TCM memory in split mode
> > > + * allocate and add remoteproc carveout for TCM memory
> > >   *
> > >   * return 0 on success, otherwise non-zero value on failure
> > >   */
> > > -static int add_tcm_carveout_split_mode(struct rproc *rproc)
> > > +static int add_tcm_banks(struct rproc *rproc)
> > >  {
> > >     struct rproc_mem_entry *rproc_mem;
> > >     struct zynqmp_r5_core *r5_core;
> > > @@ -580,10 +580,10 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
> > >                                          ZYNQMP_PM_REQUEST_ACK_BLOCKING);
> > >             if (ret < 0) {
> > >                     dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
> > > -                   goto release_tcm_split;
> > > +                   goto release_tcm;
> > >             }
> > >
> > > -           dev_dbg(dev, "TCM carveout split mode %s addr=%llx, da=0x%x, size=0x%lx",
> > > +           dev_dbg(dev, "TCM carveout %s addr=%llx, da=0x%x, size=0x%lx",
> > >                     bank_name, bank_addr, da, bank_size);
> > >
> > >             rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
> > > @@ -593,7 +593,7 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
> > >             if (!rproc_mem) {
> > >                     ret = -ENOMEM;
> > >                     zynqmp_pm_release_node(pm_domain_id);
> > > -                   goto release_tcm_split;
> > > +                   goto release_tcm;
> > >             }
> > >
> > >             rproc_add_carveout(rproc, rproc_mem);
> > > @@ -601,7 +601,7 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
> > >
> > >     return 0;
> > >
> > > -release_tcm_split:
> > > +release_tcm:
> > >     /* If failed, Turn off all TCM banks turned on before */
> > >     for (i--; i >= 0; i--) {
> > >             pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
> > > @@ -610,127 +610,6 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
> > >     return ret;
> > >  }
> > >
> > > -/*
> > > - * add_tcm_carveout_lockstep_mode()
> > > - * @rproc: single R5 core's corresponding rproc instance
> > > - *
> > > - * allocate and add remoteproc carveout for TCM memory in lockstep mode
> > > - *
> > > - * return 0 on success, otherwise non-zero value on failure
> > > - */
> > > -static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
> > > -{
> > > -   struct rproc_mem_entry *rproc_mem;
> > > -   struct zynqmp_r5_core *r5_core;
> > > -   int i, num_banks, ret;
> > > -   phys_addr_t bank_addr;
> > > -   size_t bank_size = 0;
> > > -   struct device *dev;
> > > -   u32 pm_domain_id;
> > > -   char *bank_name;
> > > -   u32 da;
> > > -
> > > -   r5_core = rproc->priv;
> > > -   dev = r5_core->dev;
> > > -
> > > -   /* Go through zynqmp banks for r5 node */
> > > -   num_banks = r5_core->tcm_bank_count;
> > > -
> > > -   /*
> > > -    * In lockstep mode, TCM is contiguous memory block
> > > -    * However, each TCM block still needs to be enabled individually.
> > > -    * So, Enable each TCM block individually.
> > > -    * Although ATCM and BTCM is contiguous memory block, add two separate
> > > -    * carveouts for both.
> > > -    */
> > > -   for (i = 0; i < num_banks; i++) {
> > > -           pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
> > > -
> > > -           /* Turn on each TCM bank individually */
> > > -           ret = zynqmp_pm_request_node(pm_domain_id,
> > > -                                        ZYNQMP_PM_CAPABILITY_ACCESS, 0,
> > > -                                        ZYNQMP_PM_REQUEST_ACK_BLOCKING);
> > > -           if (ret < 0) {
> > > -                   dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
> > > -                   goto release_tcm_lockstep;
> > > -           }
> > > -
> > > -           bank_size = r5_core->tcm_banks[i]->size;
> > > -           if (bank_size == 0)
> > > -                   continue;
> > > -
> > > -           bank_addr = r5_core->tcm_banks[i]->addr;
> > > -           da = r5_core->tcm_banks[i]->da;
> > > -           bank_name = r5_core->tcm_banks[i]->bank_name;
> > > -
> > > -           /* Register TCM address range, TCM map and unmap functions */
> > > -           rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
> > > -                                            bank_size, da,
> > > -                                            tcm_mem_map, tcm_mem_unmap,
> > > -                                            bank_name);
> > > -           if (!rproc_mem) {
> > > -                   ret = -ENOMEM;
> > > -                   zynqmp_pm_release_node(pm_domain_id);
> > > -                   goto release_tcm_lockstep;
> > > -           }
> > > -
> > > -           /* If registration is success, add carveouts */
> > > -           rproc_add_carveout(rproc, rproc_mem);
> > > -
> > > -           dev_dbg(dev, "TCM carveout lockstep mode %s addr=0x%llx, da=0x%x, size=0x%lx",
> > > -                   bank_name, bank_addr, da, bank_size);
> > > -   }
> > > -
> > > -   return 0;
> > > -
> > > -release_tcm_lockstep:
> > > -   /* If failed, Turn off all TCM banks turned on before */
> > > -   for (i--; i >= 0; i--) {
> > > -           pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
> > > -           zynqmp_pm_release_node(pm_domain_id);
> > > -   }
> > > -   return ret;
> > > -}
> > > -
> > > -/*
> > > - * add_tcm_banks()
> > > - * @rproc: single R5 core's corresponding rproc instance
> > > - *
> > > - * allocate and add remoteproc carveouts for TCM memory based on cluster mode
> > > - *
> > > - * return 0 on success, otherwise non-zero value on failure
> > > - */
> > > -static int add_tcm_banks(struct rproc *rproc)
> > > -{
> > > -   struct zynqmp_r5_cluster *cluster;
> > > -   struct zynqmp_r5_core *r5_core;
> > > -   struct device *dev;
> > > -
> > > -   r5_core = rproc->priv;
> > > -   if (!r5_core)
> > > -           return -EINVAL;
> > > -
> > > -   dev = r5_core->dev;
> > > -
> > > -   cluster = dev_get_drvdata(dev->parent);
> > > -   if (!cluster) {
> > > -           dev_err(dev->parent, "Invalid driver data\n");
> > > -           return -EINVAL;
> > > -   }
> > > -
> > > -   /*
> > > -    * In lockstep mode TCM banks are one contiguous memory region of 256Kb
> > > -    * In split mode, each TCM bank is 64Kb and not contiguous.
> > > -    * We add memory carveouts accordingly.
> > > -    */
> > > -   if (cluster->mode == SPLIT_MODE)
> > > -           return add_tcm_carveout_split_mode(rproc);
> > > -   else if (cluster->mode == LOCKSTEP_MODE)
> > > -           return add_tcm_carveout_lockstep_mode(rproc);
> > > -
> > > -   return -EINVAL;
> > > -}
> > > -
> > >  /*
> > >   * zynqmp_r5_parse_fw()
> > >   * @rproc: single R5 core's corresponding rproc instance
> > > --
> > > 2.25.1
> > >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux