Re: [PATCH v11 1/4] remoteproc: zynqmp: fix lockstep mode memory region

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 19, 2024 at 09:44:34AM -0800, Tanmay Shah wrote:
> In lockstep mode, r5 core0 uses TCM of R5 core1. Following is lockstep
> mode memory region as per hardware reference manual.
> 
>     |      *TCM*         |   *R5 View* | *Linux view* |
>     | R5_0 ATCM (128 KB) | 0x0000_0000 | 0xFFE0_0000  |
>     | R5_0 BTCM (128 KB) | 0x0002_0000 | 0xFFE2_0000  |
> 
> However, driver shouldn't model it as above because R5 core0 TCM and core1
> TCM has different power-domains mapped to it.
> Hence, TCM address space in lockstep mode should be modeled as 64KB
> regions only where each region has its own power-domain as following:
> 
>     |      *TCM*         |   *R5 View* | *Linux view* |
>     | R5_0 ATCM0 (64 KB) | 0x0000_0000 | 0xFFE0_0000  |
>     | R5_0 BTCM0 (64 KB) | 0x0002_0000 | 0xFFE2_0000  |
>     | R5_0 ATCM1 (64 KB) | 0x0001_0000 | 0xFFE1_0000  |
>     | R5_0 BTCM1 (64 KB) | 0x0003_0000 | 0xFFE3_0000  |
> 
> This makes driver maintanance easy and makes design robust for future
> platorms as well.
> 
> Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx>

Now that I have a clearer picture of where things are going, I am adding this
patch to rproc-next.

I'll wait for the DT crew for the rest of this set.

Thanks,
Mathieu

> ---
>  drivers/remoteproc/xlnx_r5_remoteproc.c | 145 ++----------------------
>  1 file changed, 12 insertions(+), 133 deletions(-)
> 
> diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
> index 4395edea9a64..42b0384d34f2 100644
> --- a/drivers/remoteproc/xlnx_r5_remoteproc.c
> +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
> @@ -84,12 +84,12 @@ static const struct mem_bank_data zynqmp_tcm_banks_split[] = {
>  	{0xffeb0000UL, 0x20000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
>  };
>  
> -/* In lockstep mode cluster combines each 64KB TCM and makes 128KB TCM */
> +/* In lockstep mode cluster uses each 64KB TCM from second core as well */
>  static const struct mem_bank_data zynqmp_tcm_banks_lockstep[] = {
> -	{0xffe00000UL, 0x0, 0x20000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 128KB each */
> -	{0xffe20000UL, 0x20000, 0x20000UL, PD_R5_0_BTCM, "btcm0"},
> -	{0, 0, 0, PD_R5_1_ATCM, ""},
> -	{0, 0, 0, PD_R5_1_BTCM, ""},
> +	{0xffe00000UL, 0x0, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
> +	{0xffe20000UL, 0x20000, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
> +	{0xffe10000UL, 0x10000, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
> +	{0xffe30000UL, 0x30000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
>  };
>  
>  /**
> @@ -540,14 +540,14 @@ static int tcm_mem_map(struct rproc *rproc,
>  }
>  
>  /*
> - * add_tcm_carveout_split_mode()
> + * add_tcm_banks()
>   * @rproc: single R5 core's corresponding rproc instance
>   *
> - * allocate and add remoteproc carveout for TCM memory in split mode
> + * allocate and add remoteproc carveout for TCM memory
>   *
>   * return 0 on success, otherwise non-zero value on failure
>   */
> -static int add_tcm_carveout_split_mode(struct rproc *rproc)
> +static int add_tcm_banks(struct rproc *rproc)
>  {
>  	struct rproc_mem_entry *rproc_mem;
>  	struct zynqmp_r5_core *r5_core;
> @@ -580,10 +580,10 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
>  					     ZYNQMP_PM_REQUEST_ACK_BLOCKING);
>  		if (ret < 0) {
>  			dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
> -			goto release_tcm_split;
> +			goto release_tcm;
>  		}
>  
> -		dev_dbg(dev, "TCM carveout split mode %s addr=%llx, da=0x%x, size=0x%lx",
> +		dev_dbg(dev, "TCM carveout %s addr=%llx, da=0x%x, size=0x%lx",
>  			bank_name, bank_addr, da, bank_size);
>  
>  		rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
> @@ -593,7 +593,7 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
>  		if (!rproc_mem) {
>  			ret = -ENOMEM;
>  			zynqmp_pm_release_node(pm_domain_id);
> -			goto release_tcm_split;
> +			goto release_tcm;
>  		}
>  
>  		rproc_add_carveout(rproc, rproc_mem);
> @@ -601,7 +601,7 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
>  
>  	return 0;
>  
> -release_tcm_split:
> +release_tcm:
>  	/* If failed, Turn off all TCM banks turned on before */
>  	for (i--; i >= 0; i--) {
>  		pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
> @@ -610,127 +610,6 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
>  	return ret;
>  }
>  
> -/*
> - * add_tcm_carveout_lockstep_mode()
> - * @rproc: single R5 core's corresponding rproc instance
> - *
> - * allocate and add remoteproc carveout for TCM memory in lockstep mode
> - *
> - * return 0 on success, otherwise non-zero value on failure
> - */
> -static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
> -{
> -	struct rproc_mem_entry *rproc_mem;
> -	struct zynqmp_r5_core *r5_core;
> -	int i, num_banks, ret;
> -	phys_addr_t bank_addr;
> -	size_t bank_size = 0;
> -	struct device *dev;
> -	u32 pm_domain_id;
> -	char *bank_name;
> -	u32 da;
> -
> -	r5_core = rproc->priv;
> -	dev = r5_core->dev;
> -
> -	/* Go through zynqmp banks for r5 node */
> -	num_banks = r5_core->tcm_bank_count;
> -
> -	/*
> -	 * In lockstep mode, TCM is contiguous memory block
> -	 * However, each TCM block still needs to be enabled individually.
> -	 * So, Enable each TCM block individually.
> -	 * Although ATCM and BTCM is contiguous memory block, add two separate
> -	 * carveouts for both.
> -	 */
> -	for (i = 0; i < num_banks; i++) {
> -		pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
> -
> -		/* Turn on each TCM bank individually */
> -		ret = zynqmp_pm_request_node(pm_domain_id,
> -					     ZYNQMP_PM_CAPABILITY_ACCESS, 0,
> -					     ZYNQMP_PM_REQUEST_ACK_BLOCKING);
> -		if (ret < 0) {
> -			dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
> -			goto release_tcm_lockstep;
> -		}
> -
> -		bank_size = r5_core->tcm_banks[i]->size;
> -		if (bank_size == 0)
> -			continue;
> -
> -		bank_addr = r5_core->tcm_banks[i]->addr;
> -		da = r5_core->tcm_banks[i]->da;
> -		bank_name = r5_core->tcm_banks[i]->bank_name;
> -
> -		/* Register TCM address range, TCM map and unmap functions */
> -		rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
> -						 bank_size, da,
> -						 tcm_mem_map, tcm_mem_unmap,
> -						 bank_name);
> -		if (!rproc_mem) {
> -			ret = -ENOMEM;
> -			zynqmp_pm_release_node(pm_domain_id);
> -			goto release_tcm_lockstep;
> -		}
> -
> -		/* If registration is success, add carveouts */
> -		rproc_add_carveout(rproc, rproc_mem);
> -
> -		dev_dbg(dev, "TCM carveout lockstep mode %s addr=0x%llx, da=0x%x, size=0x%lx",
> -			bank_name, bank_addr, da, bank_size);
> -	}
> -
> -	return 0;
> -
> -release_tcm_lockstep:
> -	/* If failed, Turn off all TCM banks turned on before */
> -	for (i--; i >= 0; i--) {
> -		pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
> -		zynqmp_pm_release_node(pm_domain_id);
> -	}
> -	return ret;
> -}
> -
> -/*
> - * add_tcm_banks()
> - * @rproc: single R5 core's corresponding rproc instance
> - *
> - * allocate and add remoteproc carveouts for TCM memory based on cluster mode
> - *
> - * return 0 on success, otherwise non-zero value on failure
> - */
> -static int add_tcm_banks(struct rproc *rproc)
> -{
> -	struct zynqmp_r5_cluster *cluster;
> -	struct zynqmp_r5_core *r5_core;
> -	struct device *dev;
> -
> -	r5_core = rproc->priv;
> -	if (!r5_core)
> -		return -EINVAL;
> -
> -	dev = r5_core->dev;
> -
> -	cluster = dev_get_drvdata(dev->parent);
> -	if (!cluster) {
> -		dev_err(dev->parent, "Invalid driver data\n");
> -		return -EINVAL;
> -	}
> -
> -	/*
> -	 * In lockstep mode TCM banks are one contiguous memory region of 256Kb
> -	 * In split mode, each TCM bank is 64Kb and not contiguous.
> -	 * We add memory carveouts accordingly.
> -	 */
> -	if (cluster->mode == SPLIT_MODE)
> -		return add_tcm_carveout_split_mode(rproc);
> -	else if (cluster->mode == LOCKSTEP_MODE)
> -		return add_tcm_carveout_lockstep_mode(rproc);
> -
> -	return -EINVAL;
> -}
> -
>  /*
>   * zynqmp_r5_parse_fw()
>   * @rproc: single R5 core's corresponding rproc instance
> -- 
> 2.25.1
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux