Hi Arnd, Hi Olof, ... just a polite ping on the patchset. Thanks. On 19 January 2015 at 15:53, Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx> wrote: > Hello, > > Fujitsu have a series of SoC already shipping based around > variations of 2xCA7+2xCA15 big.LITTLE architecture, and we would like > to upstream the basic support in this series. > > MB86S70 is a big.LITTLE platform with 2xCA7+2xCA15 and an additional > CM3 as the master. MB86S73 is a simple 2xCA7 and an additional CM3 > master. > > The DT includes references to sdhci patches which are being sent to > the mmc list at the same time. > > We welcome any comments or questions. > > Changes since v3: > * Identify platform, by checking presence of DT node > "fujitsu,mb86s70-scb-1.0" before populating cpu clocks and MCPM > support. > * Disable clock upon gpio module remove > * Lower init level of gpio driver from subsys_initcall to module_init > * Use managed device resource allocation in MHU driver > > Changes since v2: > * Minor cleanup of MCPM as suggested by Nicolas Pitre. > > Changes since v1: > * Thanks to Arnd, modified clock driver to populate clocks only when > some user need them. Node name changed from "fujitsu,mb86s70-clk" to > "fujitsu,mb86s70-crg11" . Controller+Domain+Port of a clock are now > three cells specified by the user node. > * aliases moved into board DTS files > * Voltage supply moved as per-board DT node. > * Removed default overly verbose loglevel=8 > * Specify -march=armv7-a flag for mcpm.c and smc.S that contain ARMv7 > specific code. > * Removed wrongly put outer_flush_all(), now using standard > v7_exit_coherency_flush() instead of platform specific macro. > * Simplified GPIO offset calculations in gpio-mb86s70.c driver. And > added .remove() for the driver > * ARM MHU driver provided a .remove() to enable module unloading. > * A few other misc cleanups suggested in v1 submission. > > Thanks. > > Jassi Brar (8): > ARM: Add platform support for Fujitsu MB86S7X SoCs > mailbox: arm_mhu: add driver for ARM MHU controller > ARM: MB86S7X: Add MCPM support > clk: Add clock driver for mb86s7x > gpio: Add Fujitsu MB86S7x GPIO driver > dt: mb86s7x: add dt files for MB86S7x evbs > of: add Fujitsu vendor prefix > ARM: MB86S7x: Add configs > > Documentation/devicetree/bindings/arm/mb86s7x.txt | 8 + > .../bindings/clock/fujitsu,mb86s70-crg11.txt | 26 + > .../bindings/gpio/fujitsu,mb86s70-gpio.txt | 20 + > .../devicetree/bindings/mailbox/arm-mhu.txt | 33 ++ > .../devicetree/bindings/soc/mb86s7x/scb_mhu.txt | 35 ++ > .../devicetree/bindings/vendor-prefixes.txt | 1 + > MAINTAINERS | 7 + > arch/arm/Kconfig | 2 + > arch/arm/Makefile | 1 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/mb86s70.dtsi | 91 ++++ > arch/arm/boot/dts/mb86s70eb.dts | 57 +++ > arch/arm/boot/dts/mb86s73.dtsi | 63 +++ > arch/arm/boot/dts/mb86s73eb.dts | 44 ++ > arch/arm/boot/dts/mb86s7x.dtsi | 140 ++++++ > arch/arm/configs/fujitsu_defconfig | 232 +++++++++ > arch/arm/configs/multi_v7_defconfig | 5 + > arch/arm/mach-mb86s7x/Kconfig | 19 + > arch/arm/mach-mb86s7x/Makefile | 3 + > arch/arm/mach-mb86s7x/board.c | 23 + > arch/arm/mach-mb86s7x/mcpm.c | 318 +++++++++++++ > arch/arm/mach-mb86s7x/smc.S | 27 ++ > drivers/clk/Makefile | 1 + > drivers/clk/clk-mb86s7x.c | 386 +++++++++++++++ > drivers/gpio/Kconfig | 6 + > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-mb86s7x.c | 232 +++++++++ > drivers/mailbox/Kconfig | 7 + > drivers/mailbox/Makefile | 2 + > drivers/mailbox/arm_mhu.c | 211 ++++++++ > drivers/soc/Makefile | 1 + > drivers/soc/mb86s7x/Makefile | 4 + > drivers/soc/mb86s7x/scb_mhu.c | 528 +++++++++++++++++++++ > include/soc/mb86s7x/scb_mhu.h | 105 ++++ > 34 files changed, 2640 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/mb86s7x.txt > create mode 100644 Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt > create mode 100644 Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt > create mode 100644 Documentation/devicetree/bindings/mailbox/arm-mhu.txt > create mode 100644 Documentation/devicetree/bindings/soc/mb86s7x/scb_mhu.txt > create mode 100644 arch/arm/boot/dts/mb86s70.dtsi > create mode 100644 arch/arm/boot/dts/mb86s70eb.dts > create mode 100644 arch/arm/boot/dts/mb86s73.dtsi > create mode 100644 arch/arm/boot/dts/mb86s73eb.dts > create mode 100644 arch/arm/boot/dts/mb86s7x.dtsi > create mode 100644 arch/arm/configs/fujitsu_defconfig > create mode 100644 arch/arm/mach-mb86s7x/Kconfig > create mode 100644 arch/arm/mach-mb86s7x/Makefile > create mode 100644 arch/arm/mach-mb86s7x/board.c > create mode 100644 arch/arm/mach-mb86s7x/mcpm.c > create mode 100644 arch/arm/mach-mb86s7x/smc.S > create mode 100644 drivers/clk/clk-mb86s7x.c > create mode 100644 drivers/gpio/gpio-mb86s7x.c > create mode 100644 drivers/mailbox/arm_mhu.c > create mode 100644 drivers/soc/mb86s7x/Makefile > create mode 100644 drivers/soc/mb86s7x/scb_mhu.c > create mode 100644 include/soc/mb86s7x/scb_mhu.h > > -- > 1.9.0 > -- Linaro.org │ Open source software for ARM SoCs | Follow Linaro http://facebook.com/pages/Linaro/155974581091106 - http://twitter.com/#!/linaroorg - http://linaro.org/linaro-blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
