Reviewed-by: Jason Gunthorpe <jason.gunthorpe@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Christophe Ricard <christophe-h.ricard@xxxxxx>
---
.../bindings/security/tpm/st33zp24-spi.txt | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
new file mode 100644
index 0000000..158b016
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
@@ -0,0 +1,34 @@
+* STMicroelectronics SAS. ST33ZP24 TPM SoC
+
+Required properties:
+- compatible: Should be "st,st33zp24-spi".
+- spi-max-frequency: Maximum SPI frequency (<= 10000000).
+
+Optional ST33ZP24 Properties:
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
+If set, power must be present when the platform is going into sleep/hibernate mode.
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
+
+&mcspi4 {
+
+ status = "okay";
+
+ st33zp24@0 {
+
+ compatible = "st,st33zp24-spi";
+
+ spi-max-frequency = <10000000>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+
+ lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ };
+};
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
