Correctly describe the interrupt as level low. Driver enforces that
anyways, but do not rely on that in the devicetree.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
index 815119c12bd48..922749bf11bc1 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -138,7 +138,7 @@ zforce: touchscreen@50 {
pinctrl-0 = <&pinctrl_zforce>;
reg = <0x50>;
interrupt-parent = <&gpio5>;
- interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&ldo1_reg>;
reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
x-size = <1072>;
--
2.39.2
