On 2/20/2024 8:15 PM, Marc Gonzalez wrote: > On 20/02/2024 14:53, Vikash Garodia wrote: > >> On 2/20/2024 6:57 PM, Krzysztof Kozlowski wrote: >> >>> On 20/02/2024 13:34, Marc Gonzalez wrote: >>> >>>> Here's the proposal for v2: >>>> >>>> qcom,venus-broken-low-power-mode >>>> >>>> Description: >>>> This property is defined for devices where playback does not work >>>> when the video decoder is in low power mode. >>> >>> Would be nice to know what's broken but if that's tricky to get, then >>> sounds fine. >> >> msm8998 supports configuring the VCodec (venus core0) GDSC in HW power control >> mode. Could you please check and confirm if the driver is configuring only the >> VCodec GDSC and not the venus GDSC. Look for the attribute >> "qcom,support-hw-trigger" in vendor dt file. > > [ Vendor DTS for easy reference: ] > [ https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/arch/arm/boot/dts/qcom/msm8998.dtsi ] > > In the queue, we have a patch enabling the Venus Decoder (VDEC) in mainline. > (It is using the previously proposed "qcom,no-low-power" mechanism, but that > might not be necessary, if I understand correctly?) > > > diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi > index 2793cc22d381a..5084191be1446 100644 > --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi > @@ -3000,6 +3000,56 @@ mdss_dsi1_phy: phy@c996400 { > }; > }; > > + venus: video-codec@cc00000 { > + compatible = "qcom,msm8998-venus"; > + reg = <0x0cc00000 0xff000>; > + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&mmcc VIDEO_TOP_GDSC>; > + clocks = <&mmcc VIDEO_CORE_CLK>, > + <&mmcc VIDEO_AHB_CLK>, > + <&mmcc VIDEO_AXI_CLK>, > + <&mmcc VIDEO_MAXI_CLK>; > + clock-names = "core", "iface", "bus", "mbus"; > + iommus = <&mmss_smmu 0x400>, > + <&mmss_smmu 0x401>, > + <&mmss_smmu 0x40a>, > + <&mmss_smmu 0x407>, > + <&mmss_smmu 0x40e>, > + <&mmss_smmu 0x40f>, > + <&mmss_smmu 0x408>, > + <&mmss_smmu 0x409>, > + <&mmss_smmu 0x40b>, > + <&mmss_smmu 0x40c>, > + <&mmss_smmu 0x40d>, > + <&mmss_smmu 0x410>, > + <&mmss_smmu 0x411>, > + <&mmss_smmu 0x421>, > + <&mmss_smmu 0x428>, > + <&mmss_smmu 0x429>, > + <&mmss_smmu 0x42b>, > + <&mmss_smmu 0x42c>, > + <&mmss_smmu 0x42d>, > + <&mmss_smmu 0x411>, > + <&mmss_smmu 0x431>; > + memory-region = <&venus_mem>; > + status = "disabled"; > + qcom,no-low-power; /*** WORK AROUND LOW-POWER ISSUE ***/ > + > + video-decoder { > + compatible = "venus-decoder"; > + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; > + clock-names = "core"; > + power-domains = <&mmcc VIDEO_SUBCORE0_GDSC>; > + }; > + > + video-encoder { > + compatible = "venus-encoder"; > + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; > + clock-names = "core"; > + power-domains = <&mmcc VIDEO_SUBCORE1_GDSC>; > + }; > + }; > + > mmss_smmu: iommu@cd00000 { > compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; > reg = <0x0cd00000 0x40000>; > diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c > index a712dd4f02a5b..ad1705e510312 100644 > --- a/drivers/media/platform/qcom/venus/core.c > +++ b/drivers/media/platform/qcom/venus/core.c > @@ -585,6 +585,43 @@ static const struct venus_resources msm8996_res = { > .fwname = "qcom/venus-4.2/venus.mbn", > }; > > +static const struct freq_tbl msm8998_freq_table[] = { > + { 1944000, 520000000 }, /* 4k UHD @ 60 (decode only) */ > + { 972000, 520000000 }, /* 4k UHD @ 30 */ > + { 489600, 346666667 }, /* 1080p @ 60 */ > + { 244800, 150000000 }, /* 1080p @ 30 */ > + { 108000, 75000000 }, /* 720p @ 30 */ > +}; > + > +static const struct reg_val msm8998_reg_preset[] = { > + { 0x80124, 0x00000003 }, > + { 0x80550, 0x01111111 }, > + { 0x80560, 0x01111111 }, > + { 0x80568, 0x01111111 }, > + { 0x80570, 0x01111111 }, > + { 0x80580, 0x01111111 }, > + { 0xe2010, 0x00000000 }, > +}; > + > +static const struct venus_resources msm8998_res = { > + .freq_tbl = msm8998_freq_table, > + .freq_tbl_size = ARRAY_SIZE(msm8998_freq_table), > + .reg_tbl = msm8998_reg_preset, > + .reg_tbl_size = ARRAY_SIZE(msm8998_reg_preset), > + .clks = {"core", "iface", "bus", "mbus"}, > + .clks_num = 4, > + .vcodec0_clks = { "core" }, > + .vcodec1_clks = { "core" }, > + .vcodec_clks_num = 1, > + .max_load = 2563200, > + .hfi_version = HFI_VERSION_3XX, > + .vmem_id = VIDC_RESOURCE_NONE, > + .vmem_size = 0, > + .vmem_addr = 0, > + .dma_mask = 0xddc00000 - 1, > + .fwname = "qcom/venus-4.4/venus.mbn", > +}; > + > static const struct freq_tbl sdm660_freq_table[] = { > { 979200, 518400000 }, > { 489600, 441600000 }, > @@ -891,6 +928,7 @@ static const struct venus_resources sc7280_res = { > static const struct of_device_id venus_dt_match[] = { > { .compatible = "qcom,msm8916-venus", .data = &msm8916_res, }, > { .compatible = "qcom,msm8996-venus", .data = &msm8996_res, }, > + { .compatible = "qcom,msm8998-venus", .data = &msm8998_res, }, > { .compatible = "qcom,sdm660-venus", .data = &sdm660_res, }, > { .compatible = "qcom,sdm845-venus", .data = &sdm845_res, }, > { .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, }, > > > > @Vikash, are you saying that perhaps the DTS for video-codec@cc00000 > needs to be written slightly differently? Certainly yes. For ex, in the clock list, i do not see the core clocks listed i.e clk_mmss_video_subcore0_clk and clk_mmss_video_subcore1_clk. You can refer the downstream video DT node [1] and then align it as per venus driver [1] https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/arch/arm/boot/dts/qcom/msm8998-vidc.dtsi Regards, Vikash