[PATCH RFC 01/21] media: ti: j721e-csi2rx: Fix races while restarting DMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



After the frame is submitted to DMA, it may happen that the submitted
list is not updated soon enough, and the DMA callback is triggered
before that.

This can lead to kernel crashes, so move everything in a single
lock/unlock section to prevent such races.

Fixes: b4a3d877dc92 ("media: ti: Add CSI2RX support for J721E")
Signed-off-by: Jai Luthra <j-luthra@xxxxxx>
---
 drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
index be47a4a24f97..e2cac8d73d78 100644
--- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
+++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
@@ -810,15 +810,14 @@ static void ti_csi2rx_buffer_queue(struct vb2_buffer *vb)
 			dev_warn(csi->dev,
 				 "Failed to drain DMA. Next frame might be bogus\n");
 
+		spin_lock_irqsave(&dma->lock, flags);
 		ret = ti_csi2rx_start_dma(csi, buf);
 		if (ret) {
-			dev_err(csi->dev, "Failed to start DMA: %d\n", ret);
-			spin_lock_irqsave(&dma->lock, flags);
 			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
 			dma->state = TI_CSI2RX_DMA_IDLE;
 			spin_unlock_irqrestore(&dma->lock, flags);
+			dev_err(csi->dev, "Failed to start DMA: %d\n", ret);
 		} else {
-			spin_lock_irqsave(&dma->lock, flags);
 			list_add_tail(&buf->list, &dma->submitted);
 			spin_unlock_irqrestore(&dma->lock, flags);
 		}

-- 
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux