This series is responsible for adding support for Wave5 driver[0] across numerous TI K3 platforms. [0]: https://lore.kernel.org/all/ae6d2ad3-0b2a-462a-a9eb-9ce01e7a7f5e@xxxxxxxxx/ Changes since v4: ================= * Remove clock-names from device tree nodes per Vignesh's request - "vcodec" clock-name is defined as macro in driver, but unused - no purpose to have it in dt node Changes since v3: ================= * Address Andrew's comments - remove disabled by default on all platforms - reorder addresses in 84s4 to be correctly sorted Changes since v2: ================= * Remove reference to k3 as requested * Rebase on v6.8-rc2 where new bindings are present * Remove am62a dts entry until hrtimer[1] patch gets merged [1]: https://patchwork.kernel.org/project/linux-media/patch/20240125130833.1953617-1-devarsht@xxxxxx/ Changes since v1: ================= * Remove sram parameters - sram-size property not included in bindings. Without this, size will default to 0 so no point in specifying until binding is added. * Remove global CMA pools for each platform - This is something that has been added in TI backport of driver and does not yet have reliable support in upstream version. - Removing for now with intention to add back once 48-bit addressing is supported in upstream Wave5 driver. Brandon Brnich (3): arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node arm64: defconfig: Enable Wave5 Video Encoder/Decoder Darren Etheridge (1): arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 8 ++++++++ arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 8 ++++++++ arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 16 ++++++++++++++++ arch/arm64/boot/dts/ti/k3-j784s4.dtsi | 2 ++ arch/arm64/configs/defconfig | 1 + 5 files changed, 35 insertions(+) -- 2.34.1
