Re: [PATCH RFC v2 1/5] dt-bindings: clock: histb-clock: Add missing common clock and Hi3798MV200 specific clock definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/21/2024 12:13 AM, Krzysztof Kozlowski wrote:
On 20/02/2024 15:06, Yang Xiwen wrote:
On 2/20/2024 6:10 PM, Krzysztof Kozlowski wrote:
On 17/02/2024 13:52, Yang Xiwen via B4 Relay wrote:
From: Yang Xiwen <forbidden405@xxxxxxxxxxx>

According to the datasheet, some clocks are missing, add their
definitions first.

Some aliases for hi3798mv200 are also introduced.

Signed-off-by: Yang Xiwen <forbidden405@xxxxxxxxxxx>
---
   include/dt-bindings/clock/histb-clock.h | 21 +++++++++++++++++++++
   1 file changed, 21 insertions(+)

diff --git a/include/dt-bindings/clock/histb-clock.h b/include/dt-bindings/clock/histb-clock.h
index e64e5770ada6..68a53053586a 100644
--- a/include/dt-bindings/clock/histb-clock.h
+++ b/include/dt-bindings/clock/histb-clock.h
@@ -58,6 +58,27 @@
   #define HISTB_USB3_UTMI_CLK1		48
   #define HISTB_USB3_PIPE_CLK1		49
   #define HISTB_USB3_SUSPEND_CLK1		50
+#define HISTB_SDIO1_BIU_CLK		51
+#define HISTB_SDIO1_CIU_CLK		52
+#define HISTB_SDIO1_DRV_CLK		53
+#define HISTB_SDIO1_SAMPLE_CLK		54
+#define HISTB_ETH0_PHY_CLK		55
+#define HISTB_ETH1_PHY_CLK		56
+#define HISTB_WDG0_CLK			57
+#define HISTB_USB2_UTMI0_CLK		HISTB_USB2_UTMI_CLK
Why? It's anyway placed oddly, the entries are ordered by number/value.

So this is somewhat broken at the beginning. It named after
histb-clock.h but actually they are all clocks for Hi3798CV200 SoC. For
Hi3798MV200(also a HiSTB SoC), there is one additional UTMI clock.


What solution do you prefer? rename UTMI_CLK to UTMI0_CLK, add UTMI1_CLK
after it and increment all the indexes after it? Then the diff would be
very ugly.
I still don't understand what is the problem you are trying to solve
here. Your commit msg says add missing ID, but that ID -
HISTB_USB2_UTMI_CLK - is already there.

I also do not get why there is a need to rename anything.


Because there are two USB2_UTMI_CLKs in total, at least for Hi3798MV200. UTMI1 is missing here. For other HiSTB SoCs, there could be even more.


If we add USB2_UTMI1_CLK, it looks silly to keep USB2_UTMI_CLK without renaming it to UTMI0. Just like all the other clocks. E.g. I2Cn_CLK(n=0,1,2,3,4) etc.., so the same for USB2_UTMI_CLK.





Best regards,
Krzysztof


--
Regards,
Yang Xiwen





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux