On Thursday 29 January 2015 08:56 PM, Varka Bhadram wrote:
Hi,
On Wednesday 28 January 2015 04:38 PM, Chunyan Zhang wrote:
Add a full sc9836-uart driver for SC9836 SoC which is based on the
spreadtrum sharkl64 platform.
This driver also support earlycon.
Originally-by: Lanqing Liu <lanqing.liu@xxxxxxxxxxxxxx>
Signed-off-by: Orson Zhai <orson.zhai@xxxxxxxxxxxxxx>
Signed-off-by: Chunyan Zhang <chunyan.zhang@xxxxxxxxxxxxxx>
Acked-by: Arnd Bergmann <arnd@xxxxxxxx>
Reviewed-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/Kconfig | 18 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/sprd_serial.c | 793
++++++++++++++++++++++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
4 files changed, 815 insertions(+)
create mode 100644 drivers/tty/serial/sprd_serial.c
(...)
+static int sprd_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct uart_port *up;
+ struct clk *clk;
+ int irq;
+ int index;
+ int ret;
+
+ for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
+ if (sprd_port[index] == NULL)
+ break;
+
+ if (index == ARRAY_SIZE(sprd_port))
+ return -EBUSY;
+
+ index = sprd_probe_dt_alias(index, &pdev->dev);
+
+ sprd_port[index] = devm_kzalloc(&pdev->dev,
+ sizeof(*sprd_port[index]), GFP_KERNEL);
+ if (!sprd_port[index])
+ return -ENOMEM;
+
+ up = &sprd_port[index]->port;
+ up->dev = &pdev->dev;
+ up->line = index;
+ up->type = PORT_SPRD;
+ up->iotype = SERIAL_IO_PORT;
+ up->uartclk = SPRD_DEF_RATE;
+ up->fifosize = SPRD_FIFO_SIZE;
+ up->ops = &serial_sprd_ops;
+ up->flags = UPF_BOOT_AUTOCONF;
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(clk))
+ up->uartclk = clk_get_rate(clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "not provide mem resource\n");
+ return -ENODEV;
+ }
This check is not required. It will be done by devm_ioremap_resource()
+ up->mapbase = res->start;
Accessing of 'res' has to be done after devm_ioremap_resource()
+ up->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(up->membase))
+ return PTR_ERR(up->membase);
+
--
Thanks,
Varka Bhadram.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
