Some WLAN chips attached to a SDIO interface, need an external clock to be operational. Since this is very common, extend the simple MMC power sequence DT binding to support an optional clock. Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> --- Changes since v2: None. Changes since v1: None. --- Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt index eaae652213ae..a462c50f19a8 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt @@ -12,6 +12,10 @@ Optional properties: at initialization and prior we start the power up procedure of the card. They will be de-asserted right after the power has been provided to the card. +- clocks : Must contain an entry for the entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entry: + "ext_clock" (External clock provided to the card). Example: -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
