Re: [PATCH 07/17] clk: renesas: rzg2l: Extend power domain support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 16.02.2024 16:08, Geert Uytterhoeven wrote:
> Hi Claudiu,
> 
> On Thu, Feb 8, 2024 at 1:44 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>>
>> RZ/{G2L, V2L, G3S}-based CPG versions have support for saving extra
>> power when clocks are disabled by activating module standby. This is done
>> through MSTOP-specific registers that are part of CPG. Each individual
>> module has one or more bits associated with one MSTOP register (see table
>> "Registers for Module Standby Mode" from HW manuals). Hardware manual
>> associates modules' clocks with one or more MSTOP bits. There are 3 mappings
>> available (identified by researching RZ/G2L, RZ/G3S, RZ/V2L HW manuals):
>>
>> case 1: N clocks mapped to N MSTOP bits (with N={0, ..., X})
>> case 2: N clocks mapped to 1 MSTOP bit  (with N={0, ..., X})
>> case 3: N clocks mapped to M MSTOP bits (with N={0, ..., X}, M={0, ..., Y})
>>
>> Case 3 has been currently identified on RZ/V2L for the VCPL4 module.
>>
>> To cover all three cases, the individual platform drivers will provide to
>> clock driver MSTOP register offset and associated bits in this register
>> as a bitmask and the clock driver will apply this bitmask to proper
>> MSTOP register.
>>
>> Apart from MSTOP support, RZ/G3S can save more power by powering down the
>> individual IPs (after MSTOP has been set) if proper bits in
>> CPG_PWRDN_IP{1,2} registers are set.
>>
>> The MSTOP and IP power down support were implemented through power
>> domains. Platform-specific clock drivers will register an array of
>> type struct rzg2l_cpg_pm_domain_init_data, which will be used to
>> instantiate properly the power domains.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> 
> Thanks for your patch!
> 
>> --- a/drivers/clk/renesas/rzg2l-cpg.c
>> +++ b/drivers/clk/renesas/rzg2l-cpg.c
>> @@ -1559,9 +1556,34 @@ static bool rzg2l_cpg_is_pm_clk(struct rzg2l_cpg_priv *priv,
>>         return true;
>>  }
[ ... ]

> 
>> @@ -234,6 +246,54 @@ struct rzg2l_reset {
>>  #define DEF_RST(_id, _off, _bit)       \
>>         DEF_RST_MON(_id, _off, _bit, -1)
>>
>> +/**
>> + * struct rzg2l_cpg_pm_domain_conf - PM domain configuration data structure
>> + * @mstop: MSTOP configuration (MSB = register offset, LSB = bitmask)
>> + * @pwrdn: PWRDN configuration (MSB = register offset, LSB = register bit)
>> + */
>> +struct rzg2l_cpg_pm_domain_conf {
>> +       u32 mstop;
>> +       u32 pwrdn;
> 
> Why not
> 
>     u16 mstop_off;
>     u16 mstop_mask;
>     u16 pwrdn_off;
>     u16 pwrdn_mask;
> 
> so you can drop the MSTOP*() and PWRDN*() macros below?

I did it like this to align with the already existing approach for this
kind of things available in this driver. I can do it as you proposed.

For the rest of your comments on this patch: I agree and will adjust the
patch in the next version.

Thank you,
Claudiu Beznea




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux