Add the SoC I2C controller nodes to the platform devicetree. Use a default bus frequency of 400kHz. They are AMBA devices that are matched on PeriphID. Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx> --- arch/mips/boot/dts/mobileye/eyeq5.dtsi | 70 ++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi index 8d4f65ec912d..d27e164f0fc1 100644 --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi @@ -70,6 +70,76 @@ soc: soc { ranges; compatible = "simple-bus"; + i2c0: i2c@300000 { + compatible = "mobileye,eyeq5-i2c", "arm,primecell"; + reg = <0 0x300000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; /* Fast mode */ + #address-cells = <1>; + #size-cells = <0>; + clocks = <&i2c_ser_clk>, <&i2c_clk>; + clock-names = "i2cclk", "apb_pclk"; + mobileye,olb = <&olb>; + mobileye,id = <0>; + }; + + i2c1: i2c@400000 { + compatible = "mobileye,eyeq5-i2c", "arm,primecell"; + reg = <0 0x400000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; /* Fast mode */ + #address-cells = <1>; + #size-cells = <0>; + clocks = <&i2c_ser_clk>, <&i2c_clk>; + clock-names = "i2cclk", "apb_pclk"; + mobileye,olb = <&olb>; + mobileye,id = <1>; + }; + + i2c2: i2c@500000 { + compatible = "mobileye,eyeq5-i2c", "arm,primecell"; + reg = <0 0x500000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; /* Fast mode */ + #address-cells = <1>; + #size-cells = <0>; + clocks = <&i2c_ser_clk>, <&i2c_clk>; + clock-names = "i2cclk", "apb_pclk"; + mobileye,olb = <&olb>; + mobileye,id = <2>; + }; + + i2c3: i2c@600000 { + compatible = "mobileye,eyeq5-i2c", "arm,primecell"; + reg = <0 0x600000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; /* Fast mode */ + #address-cells = <1>; + #size-cells = <0>; + clocks = <&i2c_ser_clk>, <&i2c_clk>; + clock-names = "i2cclk", "apb_pclk"; + mobileye,olb = <&olb>; + mobileye,id = <3>; + }; + + i2c4: i2c@700000 { + compatible = "mobileye,eyeq5-i2c", "arm,primecell"; + reg = <0 0x700000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 5 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; /* Fast mode */ + #address-cells = <1>; + #size-cells = <0>; + clocks = <&i2c_ser_clk>, <&i2c_clk>; + clock-names = "i2cclk", "apb_pclk"; + mobileye,olb = <&olb>; + mobileye,id = <4>; + }; + uart0: serial@800000 { compatible = "arm,pl011", "arm,primecell"; reg = <0 0x800000 0x0 0x1000>; -- 2.43.1