Re: [PATCH] Devicetree binding for omap3-serial & bcm2048 combination

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On Wed, Jan 28, 2015 at 10:35:01AM +0100, Pavel Machek wrote:
> Nokia N900 contains bluetooth module connected on serial
> port. Unfortunately, serial and bluetooth are rather closely coupled,
> so standard serial driver can not be used, and we really don't want
> /dev/ttyS1 to be published for internal port of bluetooth
> stack... Hence solution below.

Actually that's not true. If one takes a deeper look into Nokia's
bcm2048 driver one can see, that it's using more or less the same
protocol as other bluetooth modules (H4) with some custom
extensions. The only special thing are two additional GPIOs, which
are enabled before sending data, so that the bluetooth chip and the
omap can wakeup each other. I don't think one can speak of "closely
coupled" for this.

The only reason you needed this hacked DT binding is, that you do
not want to properly fix the bcm2048 driver, so that it can use the
omap-serial driver.

-- Sebastian

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux