On Wed, Feb 14, 2024 at 5:14 AM Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx> wrote: > > Hi Adam, > > On Sat, 10 Feb 2024 14:45:57 -0600 > Adam Ford <aford173@xxxxxxxxx> wrote: > > > From: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > > > > Add a DT binding for the HDMI PHY found on the i.MX8MP SoC. > > > > Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > > Signed-off-by: Adam Ford <aford173@xxxxxxxxx> > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > > I was a bit puzzled by this v4 series as it comes after v8... however > thanks for keeping up! It was confusing to me to try and figure out where the latest of each of the various components were found. I tried to explain it in the cover letter, but basically the previous V8 was due to the fact that some portion of it had been attempted 7 times. When it was brought to my attention that the PHY driver I used was not he right one and the HDMI-TX and the PVI driver were already applied, I reverted to using the revision history of the version of the PHY driver I pulled which was V3 and with my changes became V4. I debated on making this V9, but inreality this code was only attempted 3 times, and the subsequent device tree stuff had undergone some changes, but it was easier to keep them paired together with the PHY driver so the series could be applied as a whole. I will be making a V5 due to some build-bot feedback and your feedback, but I'll be sure to pull your tags when I try again. I just want to give people around a week to mull it over and test it. adam > > This patch is identical to the v8 I already reviewed, so: > > Reviewed-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx> > > -- > Luca Ceresoli, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com
