The driver previously supported reset pins using GPIO, but it lacked support for reset controllers. Although a reset method is generally not required, the driver fails to detect the switch if the reset was kept asserted by a previous driver. This series adds support to reset a Realtek switch using a reset controller. It also updates the binding documentation to remove the requirement of a reset method and to add the new reset controller property. It was tested on a TL-WR1043ND v1 router (rtl8366rb via SMI). Signed-off-by: Luiz Angelo Daros de Luca <luizluca@xxxxxxxxx> --- Changes in v3: - Rebased on the Realtek DSA driver refactoring (08f627164126) - Dropped the reset controller example in bindings - Used %pe in error printing - Linked to v2: https://lore.kernel.org/r/20231027190910.27044-1-luizluca@xxxxxxxxx/ Changes in v2: - Introduced a dedicated commit for removing the reset-gpios requirement - Placed binding patches before code changes - Removed the 'reset-names' property - Moved the example from the commit message to realtek.yaml - Split the reset function into _assert/_deassert variants - Modified reset functions to return a warning instead of a value - Utilized devm_reset_control_get_optional to prevent failure when the reset control is missing - Used 'true' and 'false' for boolean values - Removed the CONFIG_RESET_CONTROLLER check as stub methods are sufficient when undefined - Linked to v1: https://lore.kernel.org/r/20231024205805.19314-1-luizluca@xxxxxxxxx/ --- Luiz Angelo Daros de Luca (3): dt-bindings: net: dsa: realtek: reset-gpios is not required dt-bindings: net: dsa: realtek: add reset controller net: dsa: realtek: support reset controller .../devicetree/bindings/net/dsa/realtek.yaml | 4 +- drivers/net/dsa/realtek/realtek.h | 2 + drivers/net/dsa/realtek/rtl83xx.c | 52 +++++++++++++++++++--- drivers/net/dsa/realtek/rtl83xx.h | 2 + 4 files changed, 54 insertions(+), 6 deletions(-) --- base-commit: 0f37666d87d2dea42ec21776c3d562b7cbd71612 change-id: 20240212-realtek-reset-88a0bf25bb22 Best regards, -- Luiz Angelo Daros de Luca <luizluca@xxxxxxxxx>
