On 2/12/24 19:30, Conor Dooley wrote:
On Mon, Feb 12, 2024 at 06:48:11PM +0100, Christophe Kerello wrote:
Add a new compatible string to support MP25 SOC.
You're missing an explanation here as to why this mp25 is not compatible
with the mp1.
Cheers,
Conor.
Hi Conor,
On MP1 SoC, RNB signal (NAND controller signal) and NWAIT signal (PSRAM
controler signal) have been integrated together in the SoC. That means
that the NAND controller and the PSRAM controller (if the signal is
used) can not be used at the same time. On MP25 SoC, the 2 signals can
be used outside the SoC, so there is no more restrictions.
MP1 SoC also embeds revision 1.1 of the FMC2 IP when MP25 SoC embeds
revision 2.0 of the FMC2 IP.
I will add this explanation in the commit message.
Regards,
Christophe Kerello.
Signed-off-by: Christophe Kerello <christophe.kerello@xxxxxxxxxxx>
---
.../bindings/memory-controllers/st,stm32-fmc2-ebi.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 14f1833d37c9..12e6afeceffd 100644
--- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -23,7 +23,9 @@ maintainers:
properties:
compatible:
- const: st,stm32mp1-fmc2-ebi
+ enum:
+ - st,stm32mp1-fmc2-ebi
+ - st,stm32mp25-fmc2-ebi
reg:
maxItems: 1
--
2.25.1
