Am 13.02.24 um 09:19 schrieb Francesco Dolcini:
On Tue, Feb 13, 2024 at 06:07:28AM +0100, Wadim Egorov wrote:
Hi Judith,
Am 13.02.24 um 01:24 schrieb Judith Mendez:
Move bus-width property to *main.dtsi, above the OTAP/ITAP
delay values. While there is no error with where it is
currently at, it is easier to read the MMC node if the
bus-width property is located above the OTAP/ITAP delay
values consistently across MMC nodes.
Add missing bus-width for MMC2 in k3-am62-main.
Signed-off-by: Judith Mendez <jm@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++--
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 1 -
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 ++
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 --
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 -
I think you missed to update all non TI boards.
Not sure which boards are you referring to.
I would not change the verdin-am62 boards, the bus-width there is
consistent with the schematics, it's just correct and in the right place
IMO.
Ah, yes. Agree.
Francesco
