On Tue, Feb 13, 2024 at 06:07:28AM +0100, Wadim Egorov wrote: > Hi Judith, > > Am 13.02.24 um 01:24 schrieb Judith Mendez: > > Move bus-width property to *main.dtsi, above the OTAP/ITAP > > delay values. While there is no error with where it is > > currently at, it is easier to read the MMC node if the > > bus-width property is located above the OTAP/ITAP delay > > values consistently across MMC nodes. > > > > Add missing bus-width for MMC2 in k3-am62-main. > > > > Signed-off-by: Judith Mendez <jm@xxxxxx> > > --- > > arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++-- > > arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 1 - > > arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +- > > arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 ++ > > arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 -- > > arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 - > > I think you missed to update all non TI boards. Not sure which boards are you referring to. I would not change the verdin-am62 boards, the bus-width there is consistent with the schematics, it's just correct and in the right place IMO. Francesco
