Re: [PATCH 3/3] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Feb 10, 2024 at 04:13:51PM +0530, Krishna Kurapati PSSNV wrote:
> > Krishna, when you make v2 can you update the wording about the USB 2.0
> > mux? Maybe something like "which by default on boot is selected to mux
> > to the external port on the board (with the other option being a test
> > point)." instead of the wording I originally had? That way the
> > information Dmitry requested here is easily accessible in the future.
> > 
> > > 
> > > > 
> 
> [...]
> 
> > > > > > >    };
> > > > > > 
> > > > > > Isn't gpio-hog the preferred way to describe that ?
> > > > > 
> > > > > That depends. As this pinctrl describes board configuration, I'd agree
> > > > > with Neil.
> > > > 
> > > > I unfortunately don't have the experience with gpio-hog to weigh in
> > > > here, but wouldn't be opposed to Krishna switching it if that's what's
> > > > recommended for this type of thing.
> > > 
> > > Quoting gpio.txt:
> > > 
> > > The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism
> > > providing automatic GPIO request and configuration as part of the
> > > gpio-controller's driver probe function.
> > > 
> > > See sdm845-pinctrl.yaml for an example of the gpio-hog node.
> > 
> > Thanks, that seems like the way to go. Krishna please take note of this
> > for v2!
> > 
> 
> Hi Andrew,
> 
>  Can you help test the following patch. It is just an add-on to your
> original one. I don't have a SA8540P Ride at the moment and getting one
> might take time. Incase you can confirm this patch is working. I can push v2
> of this series.

I just realized that unfortunately I no longer have access to a
sa8540p-ride, and I'm not sure if I'll regain access.

So I would not be opposed to dropping this patch altogether and someone
dealing with sa8540p-ride when they can test it :/

Sorry,
Andrew

> 
> 
> diff --git
> a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
> b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
> index ed344deaf8b9..aa42ac5a3197 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
> @@ -36,6 +36,10 @@ patternProperties:
>              $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
>          additionalProperties: false
> 
> +  "-hog(-[0-9]+)?$":
> +    required:
> +      - gpio-hog
> +
>  $defs:
>    qcom-sc8280xp-tlmm-state:
>      type: object
> diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> index b04f72ec097c..aa0cec0b4cc2 100644
> --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> @@ -503,6 +503,18 @@ &usb_2_qmpphy0 {
>         status = "okay";
>  };
> 
> +&usb_2 {
> +       pinctrl-0 = <&usb2_en_state>;
> +       pinctrl-names = "default";
> +
> +       status = "okay";
> +};
> +
> +&usb_2_dwc3 {
> +       phy-names = "usb2-port0", "usb3-port0";
> +       phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>;
> +};
> +
>  &xo_board_clk {
>         clock-frequency = <38400000>;
>  };
> @@ -655,4 +667,19 @@ wake-pins {
>                         bias-pull-up;
>                 };
>         };
> +
> +       usb2-en-hog {
> +               gpio-hog;
> +               gpios = <24 GPIO_ACTIVE_LOW>;
> +               output-low;
> +       };
> +
> +       usb2_en_state: usb2-en-state {
> +               /* TS3USB221A USB2.0 mux select */
> +               pins = "gpio24";
> +               function = "gpio";
> +               drive-strength = <2>;
> +               bias-disable;
> +               output-low;
> +       };
> 
> 
> Regards,
> Krishna,
> 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux