Re: [PATCH 3/3] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Krishna, when you make v2 can you update the wording about the USB 2.0
mux? Maybe something like "which by default on boot is selected to mux
to the external port on the board (with the other option being a test
point)." instead of the wording I originally had? That way the
information Dmitry requested here is easily accessible in the future.




[...]

   };

Isn't gpio-hog the preferred way to describe that ?

That depends. As this pinctrl describes board configuration, I'd agree
with Neil.

I unfortunately don't have the experience with gpio-hog to weigh in
here, but wouldn't be opposed to Krishna switching it if that's what's
recommended for this type of thing.

Quoting gpio.txt:

The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism
providing automatic GPIO request and configuration as part of the
gpio-controller's driver probe function.

See sdm845-pinctrl.yaml for an example of the gpio-hog node.

Thanks, that seems like the way to go. Krishna please take note of this
for v2!


Hi Andrew,

Can you help test the following patch. It is just an add-on to your original one. I don't have a SA8540P Ride at the moment and getting one might take time. Incase you can confirm this patch is working. I can push v2 of this series.


diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
index ed344deaf8b9..aa42ac5a3197 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -36,6 +36,10 @@ patternProperties:
             $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
         additionalProperties: false

+  "-hog(-[0-9]+)?$":
+    required:
+      - gpio-hog
+
 $defs:
   qcom-sc8280xp-tlmm-state:
     type: object
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index b04f72ec097c..aa0cec0b4cc2 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -503,6 +503,18 @@ &usb_2_qmpphy0 {
        status = "okay";
 };

+&usb_2 {
+       pinctrl-0 = <&usb2_en_state>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&usb_2_dwc3 {
+       phy-names = "usb2-port0", "usb3-port0";
+       phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>;
+};
+
 &xo_board_clk {
        clock-frequency = <38400000>;
 };
@@ -655,4 +667,19 @@ wake-pins {
                        bias-pull-up;
                };
        };
+
+       usb2-en-hog {
+               gpio-hog;
+               gpios = <24 GPIO_ACTIVE_LOW>;
+               output-low;
+       };
+
+       usb2_en_state: usb2-en-state {
+               /* TS3USB221A USB2.0 mux select */
+               pins = "gpio24";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               output-low;
+       };


Regards,
Krishna,




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux