WKUP_PADCONFIG registers for wkup_uart0 and mcu_uart0 lies under wkup_pmx2 for J7200. Thus, modify pinmux for both of them. Also, remove the redundant clock-frequency property from mcu_uart0 node. Only Tx and Rx Signal lines for wkup_uart0 are brought out on J721S2 Common Proc Board and J784S4 EVM, but CTS and RTS signal lines are not brought out. Thus, remove pinmux for CTS and RTS signal lines for wkup_uart0 in J721S2 and J784S4. v1 Link : https://lore.kernel.org/all/20240208110602.931573-1-b-kapoor@xxxxxx/ Changelog v1->v2: - Divided Pinmux and clock frequency patch(1/3) for J7200 into 2 patches - Change commit message to include wkup_uart0 for referring to the instance Rebased to 20240212 Bhavya Kapoor (4): arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0 arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from mcu_uart0 arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in wkup_uart0 arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0 .../boot/dts/ti/k3-j7200-common-proc-board.dts | 18 +++++++++--------- .../dts/ti/k3-j721s2-common-proc-board.dts | 2 -- arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 2 -- 3 files changed, 9 insertions(+), 13 deletions(-) -- 2.34.1
