Enable full support (XHCI, EHCI, OHCI) for the lower USB3 port from Radxa Rock 5 Model B. The upper one is already supported. Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> --- .../boot/dts/rockchip/rk3588-rock-5b.dts | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index a0e303c3a1dc..db6f0e91f62d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -736,6 +736,14 @@ &uart2 { status = "okay"; }; +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + &u2phy2 { status = "okay"; }; @@ -755,6 +763,14 @@ &u2phy3_host { status = "okay"; }; +&usbdp_phy1 { + status = "okay"; +}; + +&usbdp_phy1_u3 { + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; }; @@ -771,6 +787,11 @@ &usb_host1_ohci { status = "okay"; }; +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; + &usb_host2_xhci { status = "okay"; }; -- 2.43.0