On 8.02.2024 07:28, Taniya Das wrote:
> Certain clocks are not accessible on QCM6490-IDP and QCS6490-RB3GEN2 boards
> thus require them to be marked protected.
>
> Also disable the LPASS nodes which are not to be used.
>
> Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
> ---
One patch per board, please
> arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 54 +++++++++++++++++++-
> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 50 +++++++++++++++++-
> 2 files changed, 102 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> index 03e97e27d16d..425e4b87490b 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: BSD-3-Clause
> /*
> - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> /dts-v1/;
> @@ -415,6 +415,58 @@
> };
> };
>
> +&gcc {
> + protected-clocks = <GCC_AGGRE_NOC_PCIE_1_AXI_CLK> ,<GCC_PCIE_1_AUX_CLK>,
> + <GCC_PCIE_1_AUX_CLK_SRC>, <GCC_PCIE_1_CFG_AHB_CLK>,
> + <GCC_PCIE_1_MSTR_AXI_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>,
> + <GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>,
> + <GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
> + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <GCC_QSPI_CORE_CLK>,
> + <GCC_QSPI_CORE_CLK_SRC>,<GCC_USB30_SEC_MASTER_CLK>,
> + <GCC_USB30_SEC_MASTER_CLK_SRC>, <GCC_USB30_SEC_MOCK_UTMI_CLK>,
> + <GCC_USB30_SEC_MOCK_UTMI_CLK_SRC>,
> + <GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC>, <GCC_USB30_SEC_SLEEP_CLK>,
> + <GCC_USB3_SEC_PHY_AUX_CLK>, <GCC_USB3_SEC_PHY_AUX_CLK_SRC>,
> + <GCC_USB3_SEC_PHY_COM_AUX_CLK>, <GCC_USB3_SEC_PHY_PIPE_CLK>,
> + <GCC_USB3_SEC_PHY_PIPE_CLK_SRC>, <GCC_CFG_NOC_LPASS_CLK>,
> + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, <GCC_MSS_CFG_AHB_CLK>,
> + <GCC_MSS_OFFLINE_AXI_CLK>, <GCC_MSS_SNOC_AXI_CLK>,
> + <GCC_MSS_Q6_MEMNOC_AXI_CLK>, <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
> + <GCC_SEC_CTRL_CLK_SRC>, <GCC_WPSS_AHB_CLK>,
> + <GCC_WPSS_AHB_BDG_MST_CLK>, <GCC_WPSS_RSCP_CLK>;
Why on earth are clocks such as USB sleep reserved? How does it work?
> +};
> +
> +&lpasscc {
> + status = "disabled";
> +};
> +
> +&lpass_audiocc {
> + qcom,adsp-skip-pll;
> + protected-clocks = <LPASS_AUDIO_CC_CDIV_RX_MCLK_DIV_CLK_SRC>,
> + <LPASS_AUDIO_CC_CODEC_MEM0_CLK>, <LPASS_AUDIO_CC_CODEC_MEM1_CLK>,
> + <LPASS_AUDIO_CC_CODEC_MEM2_CLK>, <LPASS_AUDIO_CC_CODEC_MEM_CLK>,
> + <LPASS_AUDIO_CC_EXT_MCLK0_CLK>, <LPASS_AUDIO_CC_EXT_MCLK0_CLK_SRC>,
> + <LPASS_AUDIO_CC_EXT_MCLK1_CLK>, <LPASS_AUDIO_CC_EXT_MCLK1_CLK_SRC>,
> + <LPASS_AUDIO_CC_PLL>, <LPASS_AUDIO_CC_PLL_OUT_AUX2>,
> + <LPASS_AUDIO_CC_PLL_OUT_AUX2_DIV_CLK_SRC>,
> + <LPASS_AUDIO_CC_PLL_OUT_MAIN_DIV_CLK_SRC>,
> + <LPASS_AUDIO_CC_RX_MCLK_2X_CLK>, <LPASS_AUDIO_CC_RX_MCLK_CLK>,
> + <LPASS_AUDIO_CC_RX_MCLK_CLK_SRC>;
> + /delete-property/ power-domains;
> +};
This literally disables all clocks that come out of this controller, why
not just set status = "reserved"?
> +
> +&lpass_aon {
> + status = "disabled";
> +};
> +
> +&lpass_core {
> + status = "disabled";
> +};
> +
> +&lpass_hm {
> + status = "disabled";
> +};
These three are status = "reserved" by default already, so it's a NOP..
Konrad
