RPi v2 Camera (IMX219) is an 8MP camera that can be used with SK-AM69, J721E SK, and AM68 SK through the 22-pin CSI-RX connector. Add a reference overlay for dual IMX219 RPI camera v2 modules which can be used across AM68 SK, AM69 SK, TDA4VM SK boards that have a 15/22-pin FFC connector. Also enable build testing and symbols for all the three platforms. Reviewed-by: Jai Luthra <j-luthra@xxxxxx> Signed-off-by: Vaishnav Achath <vaishnav.a@xxxxxx> --- V1->V2: * Rename overlays to indicate first platform (j721e-sk) supported and dual camera. * Add missed build test, fix missing newline. arch/arm64/boot/dts/ti/Makefile | 13 ++ .../dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso | 125 ++++++++++++++++++ 2 files changed, 138 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 4a570dffb638..e019efd3ce94 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -69,6 +69,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo # Boards with J721s2 SoC dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb @@ -106,8 +107,14 @@ k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \ k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \ k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo +k3-am68-sk-base-board-csi2-dual-imx219-dtbs := k3-am68-sk-base-board.dtb \ + k3-j721e-sk-csi2-dual-imx219.dtbo +k3-am69-sk-csi2-dual-imx219-dtbs := k3-am69-sk.dtb \ + k3-j721e-sk-csi2-dual-imx219.dtbo k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \ k3-j721e-evm-pcie0-ep.dtbo +k3-j721e-sk-csi2-dual-imx219-dtbs := k3-j721e-sk.dtb \ + k3-j721e-sk-csi2-dual-imx219.dtbo k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \ k3-j721s2-evm-pcie1-ep.dtbo dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ @@ -122,7 +129,10 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ k3-am62a7-sk-hdmi-audio.dtb \ k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \ k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \ + k3-am68-sk-base-board-csi2-dual-imx219-dtbs \ + k3-am69-sk-csi2-dual-imx219-dtbs \ k3-j721e-evm-pcie0-ep.dtb \ + k3-j721e-sk-csi2-dual-imx219-dtbs \ k3-j721s2-evm-pcie1-ep.dtb # Enable support for device-tree overlays @@ -132,5 +142,8 @@ DTC_FLAGS_k3-am62-lp-sk += -@ DTC_FLAGS_k3-am62a7-sk += -@ DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@ DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@ +DTC_FLAGS_k3-am68-sk-base-board += -@ +DTC_FLAGS_k3-am69-sk += -@ DTC_FLAGS_k3-j721e-common-proc-board += -@ +DTC_FLAGS_k3-j721e-sk += -@ DTC_FLAGS_k3-j721s2-common-proc-board += -@ diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso new file mode 100644 index 000000000000..65d7cefb6063 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/** + * DT Overlay for dual RPi Camera V2.1 (Sony IMX219) interfaced with CSI2 + * on J721E SK, AM68 SK or AM69-SK board. + * https://datasheets.raspberrypi.org/camera/camera-v2-schematic.pdf + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include "k3-pinctrl.h" + +&{/} { + clk_imx219_fixed: imx219-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&csi_mux { + idle-state = <1>; +}; + +/* CAM0 I2C */ +&cam0_i2c { + #address-cells = <1>; + #size-cells = <0>; + imx219_0: imx219_0@10 { + compatible = "sony,imx219"; + reg = <0x10>; + + clocks = <&clk_imx219_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + link-frequencies = /bits/ 64 <456000000>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +/* CAM1 I2C */ +&cam1_i2c { + #address-cells = <1>; + #size-cells = <0>; + imx219_1: imx219_1@10 { + compatible = "sony,imx219"; + reg = <0x10>; + + clocks = <&clk_imx219_fixed>; + clock-names = "xclk"; + + port { + csi2_cam1: endpoint { + remote-endpoint = <&csi2rx1_in_sensor>; + link-frequencies = /bits/ 64 <456000000>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&dphy0 { + status = "okay"; +}; + +&ti_csi2rx0 { + status = "okay"; +}; + +&cdns_csi2rx1 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi1_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx1_in_sensor: endpoint { + remote-endpoint = <&csi2_cam1>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&dphy1 { + status = "okay"; +}; + +&ti_csi2rx1 { + status = "okay"; +}; -- 2.34.1
