On Tue, Jan 16, 2024 at 07:10:25PM +0100, Frieder Schrempf wrote: > From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> > > This series adds upstream support for the Sielaff i.MX6 Solo board. > It is used as controller and user interface in vending machines. It > is based on the i.MX6 Solo SoC and features the following > peripherals and interfaces: > > * 512 MB DDR3 RAM > * 512 MB NAND Flash > * 1 MB NOR Flash > * SD card > * Debug LED > * Debug UART > * Key Inputs > * RTC > * RS232 > * 100 MBit Ethernet > * USB Hub > * USB OTG > * HDMI > * 7" LVDS IPS panel > * PWM Backlight > * Optional Extension Board with USB Ethernet NIC > > Patch 1 adds the vendor prefix, patch 2 adds the DT bindings and > patch 3 adds the DT. > > Changes in v2: > * Add Acked-by from Conor (Thanks!) > * Fix touchscreen node names (Thanks Fabio!) > > Frieder Schrempf (3): > dt-bindings: vendor-prefixes: Add Sielaff > dt-bindings: arm: fsl: Add Sielaff i.MX6 Solo board > ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board Applied both, thanks!
