Re: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 3 Feb 2024 at 08:00, Chukun Pan <amadeus@xxxxxxxxxx> wrote:
>
> Hi, Bjorn
> > That sounds good, but do we have any one of those boards that should
> > reference &ipq6018_l2? Could make plug it into the sdhci node on some
> > board?
>
> Actually I have an ipq6010 sdcard device with pmic, which needs to
> reference ipq6018_l2. Also on the downstream qsdk kernel, the sdhc
> node writes 'vqmmc-supply = <&ipq6018_l2>;' by default.
>
> > Essentially, why is it needed upstream, when there are no user?
>
> Most ipq60xx devices have pmic chips, including some ipq6000 devices,
> while another ipq6000 devices do not have the pmic chips. So it does not
> mean there are no users but the supply is board specific. Maybe we should
> move the mp5496 node outside of ipq6018.dtsi.

Yes, please. In the end, mp5496 is not a part of the SoC.

-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux