Re: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Bjorn
> That sounds good, but do we have any one of those boards that should
> reference &ipq6018_l2? Could make plug it into the sdhci node on some
> board?

Actually I have an ipq6010 sdcard device with pmic, which needs to
reference ipq6018_l2. Also on the downstream qsdk kernel, the sdhc
node writes 'vqmmc-supply = <&ipq6018_l2>;' by default.

> Essentially, why is it needed upstream, when there are no user?

Most ipq60xx devices have pmic chips, including some ipq6000 devices,
while another ipq6000 devices do not have the pmic chips. So it does not
mean there are no users but the supply is board specific. Maybe we should
move the mp5496 node outside of ipq6018.dtsi.

Thanks,
Chukun

-- 
2.25.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux