On 1/22/2024 5:00 PM, MD Danish Anwar wrote: > Hi All, > > This series adds support for ICSSG ethernet on AM64x. > This series is based on the latest next-20231211 linux-next. > > AM64x EVM has three ethernet ports. One is dedicated to CPSW and one is > dedicated to ICSSG1. The remaining port is muxed between CPSW and ICSSG1 > ICSSG1 ports. The ICSSG1 node is added in the k3-am642-evm.dts. By default > the muxed port is used by CPSW so 2nd ICSSG1 port is disabled in the > k3-am642-evm.dts. But overlay k3-am642-evm-icssg1-dualemac.dtso can be > applied to use muxed port as ICSSG1. > > This is the v3 of the series [v1]. > > Changes from v2 to v3: > *) No functional changes. > *) Rebased on latest linux-next (next-20240122) after 6.8-rc1. > > Changes from v1 to v2: > *) Fixed aliases section in k3-am642-evm.dts > *) Fixed firmware-names in k3-am642-evm.dts > *) Changed icssg1_phy1 to ethernet-phy@f from ethernet-phy@0 as suggested > by Andrew L. > *) Changed makefile to handle overlays using CONFIG_OF_ALL_DTBS as > suggested by Nishant and Andrew Davis. > *) Fixed aliases section in k3-am642-evm-icssg1-dualemac.dtso > *) Fixed pinctrl in k3-am642-evm-icssg1-dualemac.dtso > *) Updated commit message of patch 3/3 of the series to warn about adding > label name to 'mdio-mux-1' node. > > [v1] https://lore.kernel.org/all/20231207081917.340167-1-danishanwar@xxxxxx/ > [v2] https://lore.kernel.org/all/20231212165832.3933335-1-danishanwar@xxxxxx/ > For the series, Reviewed-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx>